topic Property Manager_create new properties in Collaboration with other software

Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 15:52:57 GMT

~~[list=]~~I would like to create a new property group listing the name of occupants and the rooms they occupy.
~~[list=]~~I have created the group named coordination --> inside this I will have the new property called occupants.

HOW DO I ASSIGN A PERSON TO A ROOM? Please....

Re: Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 16:38:40 GMT

Would also like to add a 2nd Property:

Air Conditioning to be added (IF room is a kitchen or a Bedroom)

Thanks ....

I know so much as this one is an IF formula but, I cant seem to add the logic for the rooms...so air con is added only to 2 rooms

Re: Property Manager_create new properties

Laszlo Nagy — Sun, 13 Dec 2020 18:13:15 GMT

atfonit wrote:
~~[list=]~~I would like to create a new property group listing the name of occupants and the rooms they occupy.
~~[list=]~~I have created the group named coordination --> inside this I will have the new property called occupants.

HOW DO I ASSIGN A PERSON TO A ROOM? Please....

Set the Data Type of the Property to "Option set", define the Option Set values (e.g. the names of persons) and if you want to be able to assign more than one person to a room, then check the "Allow multiple choices" checkbox in the "Options Setup" Dialog.

Re: Property Manager_create new properties

Laszlo Nagy — Sun, 13 Dec 2020 18:16:18 GMT

atfonit wrote:
Would also like to add a 2nd Property:

Air Conditioning to be added (IF room is a kitchen or a Bedroom)

Thanks ....

I know so much as this one is an IF formula but, I cant seem to add the logic for the rooms...so air con is added only to 2 rooms

Could you explain this in a bit more detail?
Maybe a screenshot and a detailed explanation, like the value of X should be Aif this and this condition is met otherwise its value should be B.

Re: Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 18:32:33 GMT

To better explain :

I want to have Air conditioning in 3 rooms (3 zones). Bedroom / kitchen / Living room

So the property created is Air Conditioning (as part of the coordination group). Air Con is to be added IF in either of the above zones.

Re: Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 18:40:35 GMT

Laszlo :

Regarding Occupants - the Option set list is set up - but how do i then assign a room to each person ?

Re: Property Manager_create new properties

Laszlo Nagy — Sun, 13 Dec 2020 18:58:11 GMT

Something like this?

IF ( {Property:Zone/Zone Name} <> "Bedroom", IF ( {Property:Zone/Zone Name} <> "Kitchen", IF ( {Property:Zone/Zone Name} <> "Living Room", FALSE, TRUE ), TRUE ), TRUE )

Re: Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 19:06:12 GMT

Here is the clarification for the Air Con.

? 3 rooms/ zones to have Air Con basically.

Re: Property Manager_create new properties

Laszlo Nagy — Sun, 13 Dec 2020 19:10:13 GMT

atfonit wrote:
Laszlo :

Regarding Occupants - the Option set list is set up - but how do i then assign a room to each person ?

You cannot assign a Zone to a Property available for a Person because Person is not an element type in Archicad.
You can only assign a Person to a Property available for a Zone element.

Re: Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 19:11:01 GMT

Juat pasted the code : ? i have a read error.

Re: Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 19:41:24 GMT

Laszlo --> ok for the Air Con .
Basically need to add semi colon NOT commars between textes.

However, is it normal i must choose TRUE or FALSE ??

Idea is the IF rule should set this rule right ? Not for me to choose if true or false.

--> If you could expand on the other point concerning occupants and zones a bit more that would be appreciated. See my question above -- HOW TO ASSIGN NAMES LISTED TO ZONES ?

Re: Property Manager_create new properties

Anonymous — Sun, 13 Dec 2020 20:11:33 GMT

So what property available for the zone do i use, in order to assign a person to that zone ?
I have alist of 4 rooms and 4 persons. One person needs to be assigned to each.