topic Re: Composite Wall Schedule/Scheme with composite skins shown in Collaboration with other software

Composite Wall Schedule/Scheme with composite skins shown

adzik — Sat, 11 Nov 2017 11:19:50 GMT

Hello,

I'm creating a wall scheme for an apartment building, with lots of different composite walls. I've managed to make it show all the composites layers, but is it possible make it show each layers skin (fill) as well next to its name?

Also, is it possible to make the schedule show only those composite walls on a specific storey?

TIA.

Re: Composite Wall Schedule/Scheme with composite skins show

Barry Kelly — Mon, 13 Nov 2017 00:59:28 GMT

adzik wrote:
I've managed to make it show all the composites layers, but is it possible make it show each layers skin (fill) as well next to its name?

Not that I am aware of - you can only show an image of the entire composite.

adzik wrote:
Also, is it possible to make the schedule show only those composite walls on a specific storey?

Yes, in the criteria just add a criteria for the storey - positioning > home storey.

Barry.

Re: Composite Wall Schedule/Scheme with composite skins show

adzik — Mon, 13 Nov 2017 05:31:14 GMT

"you can only show an image of the entire composite."

Care to elaborate? like .jpg or did I misunderstood?

about storeys. I've already added the home storey criteria, but the schedule still shows composites that arent present on the specified storey.

Re: Composite Wall Schedule/Scheme with composite skins show

Barry Kelly — Mon, 13 Nov 2017 05:47:05 GMT

Just the 2D or section preview in the schedule - you said you were already doing this?

Barry.

Re: Composite Wall Schedule/Scheme with composite skins show

Barry Kelly — Mon, 13 Nov 2017 06:01:01 GMT

So storey-wise you have a setting like this in the criteria?

Barry.

Re: Composite Wall Schedule/Scheme with composite skins show

adzik — Mon, 13 Nov 2017 10:23:35 GMT

Yes.

Barry wrote:
So storey-wise you have a setting like this in the criteria?

Barry.

Re: Composite Wall Schedule/Scheme with composite skins show

Barry Kelly — Tue, 14 Nov 2017 00:49:20 GMT

Well that works for me and schedules the walls only in that particular storey.

Maybe if you can show a screen shot of your schedule scheme settings we might be able to spot the problem.

Barry.

Re: Composite Wall Schedule/Scheme with composite skins show

adzik — Tue, 14 Nov 2017 05:36:46 GMT

I'm not at the office right now, but I'll send the screencap later on.

But for info - on some storeys the walls are shown correctly (i.e. only those that need to be shown) so I'm guessing I probably have some walls whose home storey is linked to the wrong storey... and if thats the case I can only blame myself for negligence

Re: Composite Wall Schedule/Scheme with composite skins show

Anonymous — Wed, 15 Nov 2017 16:50:02 GMT

I might be looking for the same solution? Here is my schedule below. I would like the 3d axon to show fills too. Any ideas? Cheers - Jakub

Re: Composite Wall Schedule/Scheme with composite skins show

Barry Kelly — Thu, 16 Nov 2017 03:35:05 GMT

Hatches and colours are all controlled in the Graphic Overrides.
So you will need to set up a special GO for schedules and then apply that to all the schedule views.

Barry.

Re: Composite Wall Schedule/Scheme with composite skins shown

Anonymous — Fri, 08 Jan 2021 04:15:11 GMT

Hi Guys,

I was wonderikng if I could get some help on this as I am new to scedules.

I am trying to setup an automated schedule similart to the above. But I only want 1 2D preview per placed item to show instead of every placed instance.

Which checkbox do i select?

Re: Composite Wall Schedule/Scheme with composite skins shown

Laszlo Nagy — Sun, 10 Jan 2021 22:35:51 GMT

One thing you need to do in the Criteria panel:
You should put all the "Composite" Criterion Lines between parentheses. Place the starting parenthesis before the first "Composite" Criterion", and place the end parenthesis after the last "Composite" Criterion". Then only those element will be scheduled that you intended.

With the generated Schedule, you will see the options panel on the left. At the top, check the "Merge Uniform Items" checkbox, that should achieve the results you are trying to get (if I understood your request right).