topic Door Schedule problem in Collaboration with other software

Door Schedule problem

Anonymous — Wed, 04 Mar 2015 18:43:34 GMT

I am having a problem with my Door Schedule. I organized the schedule by Floor Level first, and then by Door Number. The model has a Theatre that is included as part of the First Floor. The Stage Floor is 5'-0" below the First Floor and the Orchestra Pit is 8'-0" below the First Floor. All doors have an 8'-0"h. rough opening. The doors that are at the Stage and Orchestra Pit levels are being grouped with the Ground Floor (below First Floor 20'-0") even though the walls have the First Floor as their home story.
My thought is that the schedule assumes/uses a 4'-0" above the First Floor as a cut plane and because these doors are completely below that cut plane, the schedule recognizes them as part of the floor below.
Can I change any settings (such as the cut plane) in the Schedule (scheme or otherwise) to have these doors be recognized as part of the First Floor? Thanks.

Re: Door Schedule problem

DGSketcher — Thu, 05 Mar 2015 08:14:09 GMT

In the scheme settings you could look at filtering the doors by "elevation" rather than storey.

Re: Door Schedule problem

Erika Epstein — Tue, 10 Mar 2015 03:14:51 GMT

The doors belong to the story by its anchor point. For doors insertion is relative to the header or sill. You will have to adjust some of the doors to be by header and others by sill to get them to read correctly in the schedule.

Re: Door Schedule problem

Anonymous — Wed, 11 Mar 2015 14:29:28 GMT

DG & Erika- Thanks so much for the responses.