topic The following elements could not be exported due to missing geometry: in Collaboration with other software

The following elements could not be exported due to missing geometry:

Anonymous — Wed, 20 Nov 2019 09:37:49 GMT

When exporting IFC, I get a bunch of these.

Is there any way to figure out which object corresponds to these identifiers?

The following elements could not be exported due to missing geometry:
1KLfMRQZLE3gfA1Pl8G3ca
0j40ZCeoTDkR6mnsqUToM4

Re: The following elements could not be exported due to missing geometry:

Lingwisyer — Thu, 21 Nov 2019 02:25:45 GMT

You could try:

Find & Select
Element Type = Object
Add => IFC => ArchiCAD IFC ID

Re: The following elements could not be exported due to missing geometry:

Anonymous — Thu, 21 Nov 2019 10:50:23 GMT

No, doesn't work with these objects identifiers, for some reason. I was able to find other objects using this method

I tried to show all layers, then worked my way through all the floor plans.

Re: The following elements could not be exported due to missing geometry:

DGSketcher — Thu, 21 Nov 2019 11:41:12 GMT

famadorian wrote:
When exporting IFC, I get a bunch of these.

Is there any way to figure out which object corresponds to these identifiers?

The following elements could not be exported due to missing geometry:
1KLfMRQZLE3gfA1Pl8G3ca
0j40ZCeoTDkR6mnsqUToM4

Only slightly more useful than the Open & Repair option then! At least you get a reference for the missing elements. Just a suggestion but it may be worth running Open & Repair which may fix the database references. If errors are found it is probably worth saving a new copy of the file as I just found one of my views with everything intact apart from the repaired element in the model which had vanished. Thankfully I have a limited number of drawings to check.