topic Re: IFC-export in Collaboration with other software

IFC-export

Kamelite — Sun, 20 Nov 2022 09:16:28 GMT

I have a building that consist of walls made of logs. However, when exporting to IFC, something happens that I can't explain (see picture)

The leftmost picture is from AC25, the rightmost picture is from Solibri (It looks similar twith Zoom aswell)

The second story walls are copy/Paste from 1.floor, but still 1.floor walls don't behave as expected, yet second story do.

Any ideas?

.Kamelite

Re: IFC-export

Kevin Lee — Sun, 20 Nov 2022 21:32:05 GMT

For complex geometry building, I would suggest you use the IFC translator geometry conversion set to BREP.

https://community.Graphisoft.com/t5/Data-Exchange-articles/IFC-Translator-Conversion-Settings-for-IFC-Export/ta-p/303615

Re: IFC-export

Kamelite — Mon, 21 Nov 2022 07:49:09 GMT

This is the log-function in Archicad in use. What you sau about BREP might work, but it doesn't answer my question: How come it look like logs in the second story, but not the first?

.Kamelite

Re: IFC-export

Kevin Lee — Tue, 22 Nov 2022 03:32:41 GMT

It's tough to answer without seeing how it's been modelled.

I'm happy to review the model (probably best to save the potion of the model in mod) or I suggest you contact the local reseller to check the model. it must be a layer priority or a simple junction issue.