Convert pln to DWG/DXF

Hnas — Mon, 24 Apr 2023 15:18:44 GMT

Hi,

is there a tool to convert files from pln to DWG/DXF without archicad?

regards

hnas

Re: Convert pln to DWG/DXF

Miha_M — Mon, 24 Apr 2023 15:35:47 GMT

I haven't seen any, ever. I don't think there is one.

Re: Convert pln to DWG/DXF

MudratDetector — Wed, 26 Apr 2023 19:43:47 GMT

Be aware that a review of the resulting .dwg file is most likely necessary. We use the linked method above that is built in to ArchiCAD to get the .dwg file, but also post-process the results.

Post processing is done with .lsp and generates this report. The things we scrub are based on what we hear from our consultants using the .dwg files. A report of the results is generated and similar to this:

;;; number of WIPEOUTs found and erased. ;;; number of WIPEOUTs remaining in the drawing. ;;; number of entities in the drawing after each of these cleaning operations: ;;; - OVERKILL ;;; - JOIN plines on layer "A-FOUNDATION" ;;; - ERASE solid hatch patterns. ;;; - ERASE point entities. ;;; - CHANGE entities on layer "0" to layer "0-ArchiCAD". ;;; - Set DRAWORDER for layers "a-wall-extr", "a-wall-demise", "a-wall-corridor", and "a-wall-intr" to front. ;;; - FREEZE / THAW layer "a-zone-otln". ;;; ;;; ;;; Files cleaned by this script: ;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; C:\ARCHICAD PUBLISH\DWG\DWG_Unit Plan Cond. 1\2020061_Unit A2 HC_Cond 1.dwg ... Delete WIPEOUTs ... =============== ... BEFORE: Erasing 544 WIPEOUTs. ... AFTER: No WIPEOUTs found. +++ Number of Entities +++ ================== +++ Before anything: 2201 +++ After OVERKILL: 2201 (0) +++ After JOIN: 2201 (0) +++ After ERASE solid hatch: 2179 (22) +++ After ERASE points: 2169 (10) +++ Selected for "0-ArchiCAD": 1 +++ Selected for DRAWORDER: 351 +++ Status of "A-ZONE-OTLN": ERASED from file

topic Re: Convert pln to DWG/DXF in Collaboration with other software

Convert pln to DWG/DXF

Re: Convert pln to DWG/DXF

Re: Convert pln to DWG/DXF