topic Re: ArchiStair Questions in Collaboration with other software

ArchiStair Questions

Laura Yanoviak — Fri, 08 Dec 2006 20:32:27 GMT

I posted these questions a couple of months ago on the Cigraph site, but haven't received any response, so I'm posting them here in hope of feedback:

1)Within the Stair Selection Settings dialog, under "Display UP/DOWN Strings", there is an eye icon and a pulldown with two options: "- - -" and "UP/DOWN". Is this a layer setting for the text strings (and arrow)? I can't seem to figure out what this setting does.

2)The height of the left rail is always equal to the height of the right -- is this intentional, or a bug? In the US, a (wall-mounted) handrail is 34-38 inches above the nosings, and the rail at the inside of the stair (guardrail) must be a minimum of 42 inches high.

Re: ArchiStair Questions

Stress Co_ — Mon, 11 Dec 2006 17:53:01 GMT

Laura wrote:
1)Within the Stair Selection Settings dialog, under "Display UP/DOWN Strings", there is an eye icon and a pulldown with two options: "- - -" and "UP/DOWN". Is this a layer setting for the text strings (and arrow)? I can't seem to figure out what this setting does.

It turns on the text and arrow. Don't know on #2.

Re: ArchiStair Questions

Laura Yanoviak — Tue, 12 Dec 2006 15:56:27 GMT

Seems to turn off the text for me -- not the arrow -- LJY.

Re: ArchiStair Questions

Stress Co_ — Tue, 12 Dec 2006 19:02:59 GMT

Laura wrote:
Seems to turn off the text for me -- not the arrow -- LJY.

My bad.. your right, it just turns off the text.

Re: ArchiStair Questions

Fabrizio Diodati — Wed, 13 Dec 2006 14:07:21 GMT

1. the pop-up menu for the UD-DOWN string is just related to this issue and not to the arrow display status. The string "- - -" means no string.

To hide the arrow line you should choose the oen n.0 in the proper dialog window (see attached image).

2. You cannot define two different height for the left/right handrail (I put this into the list of the next implemente features).

In any case there is a workaround (just a bit boring but it works):
1. enable just the left (or right) handrail in your stair and define the required height.

2. make a copy of the stair in the same position

3. select this copy and enable just the other handrail by setting a different height value

4. hide anything using the proper dialog window (no tread, no riser, no stair body) and you will display just the handrail

Friendly
Fabrizio

Re: ArchiStair Questions

Fabrizio Diodati — Wed, 13 Dec 2006 14:13:05 GMT

look at the attached image that shows what you can get using the above workaround...

Re: ArchiStair Questions

Electric Flute — Sat, 16 Dec 2006 13:03:11 GMT

Hello Frabrizio,

When do you think ArchiStair 2 will out?
The most important add-on for AC in my opinion.

Re: ArchiStair Questions

Dave Jochum — Wed, 03 Jan 2007 04:06:06 GMT

Is anyone else having problems accessing cigraph.com? I've been trying occasionally for the last month or so with no luck.

Re: ArchiStair Questions

Anonymous — Wed, 03 Jan 2007 15:28:39 GMT

Posted: Wed Jan 03, 2007 5:06 am Post subject: Re: ArchiStair Questions

--------------------------------------------------------------------------------

Is anyone else having problems accessing cigraph.com? I've been trying occasionally for the last month or so with no luck.
Yes I have been trying to access the Cigraph site several times over the past few weeks to update to the new Architerra release but it appears to be permanently unavailable

fool of a took

Re: ArchiStair Questions

Dave Jochum — Wed, 03 Jan 2007 17:42:14 GMT

Fabrizio--Are you having problems with the website?

Re: ArchiStair Questions

Dave Jochum — Wed, 03 Jan 2007 18:10:48 GMT

Site is operational this morning

Re: ArchiStair Questions

Laura Yanoviak — Fri, 12 Jan 2007 21:20:21 GMT

Does anyone know a trick for creating a "continuous condition" for two stairs that meet at a common landing? This is what I want (see below):

Re: ArchiStair Questions

Laura Yanoviak — Fri, 12 Jan 2007 21:21:01 GMT

This is what I've got (see below):

P.S. Handrail is an independent Object that I had to create to get the handrail condition I required.