topic Re: Missing photorendering palette (out of sight) in Installation & update

Missing photorendering palette (out of sight)

sityu — Mon, 14 Nov 2016 11:28:09 GMT

Formerly I used double monitors, now I had to change back to single.
So the photorendering palette disappeared. Probably shows somewhere out of the range of the (single) monitor.
I tried many things:
-clicking in menu, then alt, then down arrow (to get the palette repisotion);
-screen resolution change;
-the virtual desktops of w10 doesn't inculde it;
-regedit searches;
-ArchiCAD Basic.prf deletion;
-etc.
-the easiest would be getting a second monitor (but for some cases, it's hard a little);

Any suggestions?

Re: Missing photorendering palette (out of sight)

DGSketcher — Mon, 14 Nov 2016 11:49:39 GMT

If hide and show photorendering settings in window > pallets doesn't work have you tried Options > Work Environment > Apply Profile > Standard... This will reset all your pallets so I hope you haven't done too much customising.

Re: Missing photorendering palette (out of sight)

Erwin Edel — Mon, 14 Nov 2016 11:49:50 GMT

It doesn't seem to be tied to anything saved in work-environment either, that would've been my suggestions.

Re: Missing photorendering palette (out of sight)

sityu — Mon, 14 Nov 2016 12:00:45 GMT

DGSketcher wrote:
If hide and show photorendering settings in window > pallets doesn't work have you tried Options > Work Environment > Apply Profile > Standard... This will reset all your pallets so I hope you haven't done too much customising.

Tried. Didn't help.

Re: Missing photorendering palette (out of sight)

DGSketcher — Mon, 14 Nov 2016 12:03:25 GMT

Installation reset?

http://helpcenter.graphisoft.com/troubleshooting/setup/repair-archicad/

Re: Missing photorendering palette (out of sight)

sityu — Mon, 14 Nov 2016 12:10:33 GMT

Success!

I've tried to delete the ARCHICAD Basic.prf file in C:\Users\<UserProfile>\AppData\Roaming\Graphisoft\ARCHICAD-64 xxx.
Restarted the ArchiCAD; but no change.

It needed a complete system reboot, and it works!