topic Re: Cut Surfaces/Floor Plan Display in Modeling

Cut Surfaces/Floor Plan Display

Anonymous — Wed, 24 May 2023 10:54:47 GMT

Hi there!

I did a project 4 years ago but now I don't like the colors/cut fills I chose.
All the walls have different thicknesses and elevations. So I changed the definitions of the cut surfaces on one wall. But then, if I choose to inject the parameters to other walls it changes the thickness and the elevation according to the first wall.

Is there a way to apply the same floor plan and section display (like the cut surface definition) to other elements? Without changing the thickness or the elevation?

Thank you!

Re: Cut Surfaces/Floor Plan Display

Karl Ottenstein — Thu, 23 Aug 2012 02:31:17 GMT

No means for copying / injecting. Instead, you have to select all walls that you want to change (Edit > Find & Select can help here) - and then open the Settings dialog. The changes you make will affect all selected walls. So, if all you change is the material, all that will be changed in all of those walls will be the material - thickness, height, etc will remain.

Re: Cut Surfaces/Floor Plan Display

Anonymous — Thu, 23 Aug 2012 09:26:14 GMT

Thank you! That helped me a lot!