https://community.graphisoft.com/t5/Modeling/Elevations-blended-vectorial-hatching-material-view/m-p/193829#M105096 No the whole idea is when two surfaces join with the same material it is expected that you would want a seam-less join.<BR /> You will need to change to a new material but all you need to do is duplicate the existing material and give it a slightly different name.<BR /> i.e. "column material 1" and "column material 2".<BR /> Barry. Thu, 12 Sep 2013 02:04:12 GMT Barry Kelly 2013-09-12T02:04:12Z https://community.graphisoft.com/t5/Modeling/Elevations-blended-vectorial-hatching-material-view/m-p/193828#M105095 <DIV class="actalk-migrated-content"><T>A question on the display of Vectorial Hatching in the elevation tool. <BR /> <BR /> Two identical elements are placed together, in this case two columns. <BR /> They have the same material, therefore the same vectorial hatch in elevation. <BR /> <BR /> Short of assigning them different materials, is there a setting which allows the identical objects to display as two elements, rather than one blended mass. <BR /> <BR /> Looking forward to someone's solution to this, Thanks (:</T></DIV> Fri, 26 May 2023 12:09:42 GMT https://community.graphisoft.com/t5/Modeling/Elevations-blended-vectorial-hatching-material-view/m-p/193828#M105095 Anonymous 2023-05-26T12:09:42Z https://community.graphisoft.com/t5/Modeling/Elevations-blended-vectorial-hatching-material-view/m-p/193829#M105096 No the whole idea is when two surfaces join with the same material it is expected that you would want a seam-less join.<BR /> You will need to change to a new material but all you need to do is duplicate the existing material and give it a slightly different name.<BR /> i.e. "column material 1" and "column material 2".<BR /> Barry. Thu, 12 Sep 2013 02:04:12 GMT https://community.graphisoft.com/t5/Modeling/Elevations-blended-vectorial-hatching-material-view/m-p/193829#M105096 Barry Kelly 2013-09-12T02:04:12Z