topic New openings won't cut into plan with old to new paste in Modeling https://community.graphisoft.com/t5/Modeling/New-openings-won-t-cut-into-plan-with-old-to-new-paste/m-p/200106#M108351 <DIV class="actalk-migrated-content"><T>I copy and paste a plan from an older version into AC15 and new door/window openings won't cut through the wall plan but do show right on the elevations. I need to redraw the wall first and can't find any workaround.</T></DIV> Thu, 25 May 2023 16:02:22 GMT Anonymous 2023-05-25T16:02:22Z New openings won't cut into plan with old to new paste https://community.graphisoft.com/t5/Modeling/New-openings-won-t-cut-into-plan-with-old-to-new-paste/m-p/200106#M108351 <DIV class="actalk-migrated-content"><T>I copy and paste a plan from an older version into AC15 and new door/window openings won't cut through the wall plan but do show right on the elevations. I need to redraw the wall first and can't find any workaround.</T></DIV> Thu, 25 May 2023 16:02:22 GMT https://community.graphisoft.com/t5/Modeling/New-openings-won-t-cut-into-plan-with-old-to-new-paste/m-p/200106#M108351 Anonymous 2023-05-25T16:02:22Z Re: New openings won't cut into plan with old to new paste https://community.graphisoft.com/t5/Modeling/New-openings-won-t-cut-into-plan-with-old-to-new-paste/m-p/200107#M108352 There's 3 reasons that I can think of off the top of my head: <BR /> 1. have you checked your Model view options under 'Document'? <BR /> 2. Another reason the might not show is the Renovation Filter - check which option your view set is on<BR /> 3. Check the Floor Plan Cut Plane Settings in your viewsets.<BR /> <BR /> hope that helps... Fri, 04 Nov 2011 06:31:04 GMT https://community.graphisoft.com/t5/Modeling/New-openings-won-t-cut-into-plan-with-old-to-new-paste/m-p/200107#M108352 Anonymous 2011-11-04T06:31:04Z Re: New openings won't cut into plan with old to new paste https://community.graphisoft.com/t5/Modeling/New-openings-won-t-cut-into-plan-with-old-to-new-paste/m-p/200108#M108353 Well Mark, it ended up as being your item 2, Renovation Filter. That saved me heaps of time. I think I should study the manual a bit more now, many thanks! Fri, 04 Nov 2011 08:56:41 GMT https://community.graphisoft.com/t5/Modeling/New-openings-won-t-cut-into-plan-with-old-to-new-paste/m-p/200108#M108353 Anonymous 2011-11-04T08:56:41Z