https://community.graphisoft.com/t5/Modeling/Windows-amp-Doors-in-Elevation/m-p/205521#M111298 If you look closely at the first image there are little white gaps on the guidelines where your opening lines would be.<BR /> I would suspect they are being drawn with a white pen.<BR /> Go into the opening settings to see if you can change it.<BR /> <BR /> Barry. Mon, 01 Sep 2014 01:51:59 GMT Barry Kelly 2014-09-01T01:51:59Z https://community.graphisoft.com/t5/Modeling/Windows-amp-Doors-in-Elevation/m-p/205520#M111297 <DIV class="actalk-migrated-content"><T>I have noticed recently that in elevations and sections my doors and windows aren't showing the edge of the frame/wall.<BR /> I've attached a pdf to show what I mean. <BR /> I have been through all settings - views, renovation filters, object attributes, but can't find the solution</T></DIV> Tue, 23 May 2023 14:24:46 GMT https://community.graphisoft.com/t5/Modeling/Windows-amp-Doors-in-Elevation/m-p/205520#M111297 sarahric 2023-05-23T14:24:46Z https://community.graphisoft.com/t5/Modeling/Windows-amp-Doors-in-Elevation/m-p/205521#M111298 If you look closely at the first image there are little white gaps on the guidelines where your opening lines would be.<BR /> I would suspect they are being drawn with a white pen.<BR /> Go into the opening settings to see if you can change it.<BR /> <BR /> Barry. Mon, 01 Sep 2014 01:51:59 GMT https://community.graphisoft.com/t5/Modeling/Windows-amp-Doors-in-Elevation/m-p/205521#M111298 Barry Kelly 2014-09-01T01:51:59Z https://community.graphisoft.com/t5/Modeling/Windows-amp-Doors-in-Elevation/m-p/205522#M111299 Thanks Barry,<BR /> I had been through every pen setting I could find in the opening settings.<BR /> Turns out it was the uncut pen setting in the wall. Mon, 01 Sep 2014 03:37:24 GMT https://community.graphisoft.com/t5/Modeling/Windows-amp-Doors-in-Elevation/m-p/205522#M111299 sarahric 2014-09-01T03:37:24Z