topic Re: How can I make a window with slope? in Modeling

How can I make a window with slope?

Anonymous — Tue, 23 May 2023 12:54:33 GMT

I made two roofs because I don't know work with the ramp very weel or it works bad.

So, I made two roofs, one to make the low slab and the other roof is the upper slab. I cut the two walls with the roof and now I want to put windows in those walls.

How is it possible?

Re: How can I make a window with slope?

Anonymous — Wed, 22 Sep 2010 18:57:04 GMT

PedroXeneta wrote:
I made two roofs because I don't know work with the ramp very weel or it works bad.

So, I made two roofs, one to make the low slab and the other roof is the upper slab. I cut the two walls with the roof and now I want to put windows in those walls.

How is it possible?

You place the windows as you would in any wall. Getting them to match the slope of the ramps will depend on the options available in the particular window part. The curtain wall tool may work better depending on your needs.

Re: How can I make a window with slope?

Anonymous — Thu, 23 Sep 2010 14:56:18 GMT

Thank you.

I will try that way!

Re: How can I make a window with slope?

Anonymous — Thu, 23 Sep 2010 15:53:40 GMT

When I make trim to roof it trims the window but the lower and the upper frame disappears....it only have frame on lateral.

Re: How can I make a window with slope?

Anonymous — Thu, 23 Sep 2010 15:55:44 GMT

the window that I used it's original from archicad 13 (W1 casement 13) but it's indiferent what window I use, it only needs be similar to that,

Re: How can I make a window with slope?

Anonymous — Thu, 23 Sep 2010 21:01:18 GMT

Would you please post a hand-drawn sketch of what you're wanting for more clarification? Thanks.

Re: How can I make a window with slope?

Anonymous — Thu, 23 Sep 2010 22:52:28 GMT

Like this