https://community.graphisoft.com/t5/Modeling/renovation-tool-two-openings-for-one-window-V-16/m-p/210012#M113889 <DIV class="actalk-migrated-content"><T>In renovation tool, am adding new skin (4" insulation with sheathing) to existing 2x4 frame. Insulation skin is drawn as "new" construction against edge of "existing" wall. When I place a window in the new skin layer however, I also need to cut an opening in the existing wall beyond. Is there an easy way to do this? Currently trying flat arch opening tool adjacent to window to cut a hole in the wall. Seems redundant and clumsy. Two holes cut, one is new skin, one in existing wall, for a single window opening.</T></DIV> Thu, 25 May 2023 16:00:37 GMT Anonymous 2023-05-25T16:00:37Z https://community.graphisoft.com/t5/Modeling/renovation-tool-two-openings-for-one-window-V-16/m-p/210012#M113889 <DIV class="actalk-migrated-content"><T>In renovation tool, am adding new skin (4" insulation with sheathing) to existing 2x4 frame. Insulation skin is drawn as "new" construction against edge of "existing" wall. When I place a window in the new skin layer however, I also need to cut an opening in the existing wall beyond. Is there an easy way to do this? Currently trying flat arch opening tool adjacent to window to cut a hole in the wall. Seems redundant and clumsy. Two holes cut, one is new skin, one in existing wall, for a single window opening.</T></DIV> Thu, 25 May 2023 16:00:37 GMT https://community.graphisoft.com/t5/Modeling/renovation-tool-two-openings-for-one-window-V-16/m-p/210012#M113889 Anonymous 2023-05-25T16:00:37Z https://community.graphisoft.com/t5/Modeling/renovation-tool-two-openings-for-one-window-V-16/m-p/210013#M113890 No, there is no easier way to do this. If you have two walls you need two openings. Sun, 11 Nov 2012 19:40:09 GMT https://community.graphisoft.com/t5/Modeling/renovation-tool-two-openings-for-one-window-V-16/m-p/210013#M113890 Anonymous 2012-11-11T19:40:09Z