topic Re: unable to change wall hight in Modeling

unable to change wall hight

Anonymous — Tue, 09 May 2023 13:48:02 GMT

Hello, I am trying to adjust a slanted wall height from 3400 to 3950, but the wall top only changes to 3423,
I tried "clear all connection" but same effect.
Please advice why

Re: unable to change wall hight

Lingwisyer — Thu, 19 Nov 2020 07:44:12 GMT

Increase the width of your wall? height.tan(alpha) < width

Re: unable to change wall hight

Anonymous — Thu, 19 Nov 2020 08:26:50 GMT

Lingwisyer wrote:
Increase the width of your wall? height.tan(alpha) < width

Hello Lingwisyer, how can I Increase the width of slanted wall? it is a slanted wall with 97 degree angle slanted

and where to set this "height.tan(alpha) < width"？
Thanks

Re: unable to change wall hight

Lingwisyer — Thu, 19 Nov 2020 09:45:27 GMT

Since you are using a Composite, you will need to modify the some of the layer thicknesses within the one you are using, or make a unique Composite for this wall.

That equation is just means that your top thickness is not less then zero.

height.tan(alpha) < width

height = height of wall
alpha = slope of face
width = width of wall base

If you want a specific top width, just input your desired height and wall slope, then add your top width to the answer.

Does that tutorial actually ask you to use a Composite rather than a Basic wall? Bit odd that it would tell you to use a specific composite with sloped faces / height that does not work...

Ling.

Re: unable to change wall hight

Anonymous — Fri, 20 Nov 2020 00:08:25 GMT

Lingwisyer wrote:
Does that tutorial actually ask you to use a Composite rather than a Basic wall? Bit odd that it would tell you to use a specific composite with sloped faces / height that does not work...
Ling.

I tried either changing to "Basic wall" or "Composite wall", the effects are the same: some times work and some times not work
As the attached picture, I follow the same way of the tutorial, one end of wall works, and the other not.
Such not being stable could because of version bug ...

Thanks Lingwisyer

Re: unable to change wall hight

Anonymous — Fri, 20 Nov 2020 00:19:20 GMT

Now I found a process to be stable-- click OK after each step:
(1) ”wall selection setting“，change to basic wall, then click OK
(2) ”wall selection setting“， change height, then click OK
(3) "wall selection setting“，change back to composite wall, then click OK

Re: unable to change wall hight

Lingwisyer — Fri, 20 Nov 2020 01:28:16 GMT

Odd... Does it also work if you set the wall sides to straight, change the height, then apply the slopes?

Re: unable to change wall hight

Anonymous — Fri, 20 Nov 2020 08:09:45 GMT

Lingwisyer wrote:
Odd... Does it also work if you set the wall sides to straight, change the height, then apply the slopes?

yes that's perfect (maybe the turorial is based on other AC version but I am using AC 23 so not all matches)
Many Thanks Lingwisyer