https://community.graphisoft.com/t5/Modeling/Trouble-trimming-wall/m-p/233772#M125124 have you tried to stretch the wall instead of trimming ? ctrl+H on PC Thu, 16 Aug 2018 06:11:56 GMT Carstenem 2018-08-16T06:11:56Z https://community.graphisoft.com/t5/Modeling/Trouble-trimming-wall/m-p/233771#M125123 <DIV class="actalk-migrated-content"><T>I am stumped as to why I can't trim a wall. Since I needed to show several pictures I have attached a file (word) that includes the pictures and an explanation of the issue. I have some thoughts on what is happening but I am hoping that someone can explain the current behavior. It should be noted that the windows in the wall were created by placing the first window in the wall at the 6 o'clock position. Then I dragged multiple windows (counter-clockwise) around the circular wall. I am wondering if the issue of losing the windows when trimming with the scissors is due to each other window needing a reference to the first window in the wall. I am also thinking that the issue of the wall just moving when trimming by moving the end point is the result of window references to the first window. I have several other ways to attack this such as using the SEO command. Personally I believe that the methods I used initially should have worked. All responses are appreciated.</T></DIV> Wed, 24 May 2023 06:20:00 GMT https://community.graphisoft.com/t5/Modeling/Trouble-trimming-wall/m-p/233771#M125123 Anonymous 2023-05-24T06:20:00Z https://community.graphisoft.com/t5/Modeling/Trouble-trimming-wall/m-p/233772#M125124 have you tried to stretch the wall instead of trimming ? ctrl+H on PC Thu, 16 Aug 2018 06:11:56 GMT https://community.graphisoft.com/t5/Modeling/Trouble-trimming-wall/m-p/233772#M125124 Carstenem 2018-08-16T06:11:56Z