topic Re: Problems with wall intersection in Modeling

Problems with wall intersection

stefanonodari — Tue, 09 May 2023 13:46:24 GMT

Hi guys,

I have some problems with the intersection of three different wall (with three different thickness).

The all walls have the same two material: an internal material and a plaster skin.

There is always a triangle in the angle.

All the walls line connect correctly.

I just try to modify the number of junction order but I don't have any resolution...

I attach below a screen of the case:

Re: Problems with wall intersection

Barry Kelly — Wed, 13 Jan 2021 01:46:31 GMT

These are not quite the same walls as yours but they all have the same building materials in the composites and all have the same junction order.

As you can see they trim fine.
Where are your reference lines? - mine all join at the same point.

Also are there any other walls - maybe in a hidden layer?
They can interfere with the trimming.

Barry.

Re: Problems with wall intersection

stefanonodari — Wed, 13 Jan 2021 15:09:08 GMT

I’d like to view a T shape connection for internal material without trim or triangle...

Re: Problems with wall intersection

David Shorter — Tue, 19 Jan 2021 01:38:01 GMT

Check that all your reference lines meet correctly like this

failing that attached a module file of the junction

Re: Problems with wall intersection

stefanonodari — Tue, 19 Jan 2021 10:03:53 GMT

Yes, three walls are well connected all together.
Maybe it’s a problem of the version of Archicad that I’m using, it’s 22.
In your drawing it’s fine, which version are you using?

Re: Problems with wall intersection

David Shorter — Tue, 19 Jan 2021 11:15:48 GMT

24 but tried it in 22 and works fine, must be something on hidden layer affecting the display

Re: Problems with wall intersection

stefanonodari — Tue, 19 Jan 2021 21:21:57 GMT

This is an image of reference line's connection

Re: Problems with wall intersection

David Maudlin — Wed, 20 Jan 2021 16:42:14 GMT

stefanonodari:

Try selecting each wall individually and changing its Junction Order up or down.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.

David