topic Re: PBC + floor plan cut plane heigh - floor plan representa in Modeling

PBC + floor plan cut plane heigh - floor plan representation

alemanda — Wed, 24 May 2023 06:44:58 GMT

Hi to all.
I have a problem.
I have two walls, A and B
A is made of building material with strength 500
B is made of building material with strength 250
A is tall 1.00m
B is tall 2.00

Floor plan cut plane is at 1.4m
Both of them are in projected mode, all relavant stories
Both walls are placed on the same.

I expect to see wall B represented entirely and not interrupted at the intersection with A.

What do I miss?

Re: PBC + floor plan cut plane heigh - floor plan representa

Barry Kelly — Wed, 09 Dec 2015 12:47:21 GMT

Is the junction order for both walls the same.
I am seeing what you would expect unless I play with the junction order.

Barry.

Re: PBC + floor plan cut plane heigh - floor plan representa

alemanda — Wed, 09 Dec 2015 12:53:26 GMT

Yes.
Junction order is the same

Re: PBC + floor plan cut plane heigh - floor plan representa

Barry Kelly — Wed, 09 Dec 2015 12:59:22 GMT

OK I am out of ideas.
I am seeing exactly what you want if I follow your description (or similar to it anyway).

Barry.

Re: PBC + floor plan cut plane heigh - floor plan representa

Barry Kelly — Wed, 09 Dec 2015 13:01:25 GMT

And with the cutplane lower.

Barry.

Re: PBC + floor plan cut plane heigh - floor plan representa

alemanda — Wed, 09 Dec 2015 13:04:29 GMT

I'm in AC 19, latest hotfix.
I'll double check.
The file I'm working on comes from AC 18.

Re: PBC + floor plan cut plane heigh - floor plan representa

alemanda — Wed, 09 Dec 2015 14:52:03 GMT

I'm doing some tests with a new file, AC 19 ITA 4013, and something strange happens.
In order to see the correct representation the weaker building material should be higher than 440.
If it is weaker than 440 a uncorrect representation occurs.

Re: PBC + floor plan cut plane heigh - floor plan representa

Barry Kelly — Thu, 10 Dec 2015 01:44:04 GMT

alemanda wrote:
I'm doing some tests with a new file, AC 19 ITA 4013, and something strange happens.
In order to see the correct representation the weaker building material should be higher than 440.
If it is weaker than 440 a uncorrect representation occurs.

You are quite right.
The same is happening for me with the break point being 435.
435 and above and it is fine.
Below 435 and it is wrong.

Barry

Re: PBC + floor plan cut plane heigh - floor plan representa

alemanda — Thu, 10 Dec 2015 06:36:23 GMT

Is it the normal and wanted behavior?
Or is it a bug?

Re: PBC + floor plan cut plane heigh - floor plan representa

Barry Kelly — Thu, 10 Dec 2015 06:39:35 GMT

I would say it is a bug.

Barry.

Re: PBC + floor plan cut plane heigh - floor plan representa

NCornia — Thu, 10 Dec 2015 20:44:48 GMT

Hello All,

Thank you for bringing this up. I'll take a look into it and report it in our internal database.

Best regards,

Re: PBC + floor plan cut plane heigh - floor plan representa

Barry Kelly — Fri, 11 Dec 2015 01:46:37 GMT

NCornia wrote:
Hello All,

Thank you for bringing this up. I'll take a look into it and report it in our internal database.

Best regards,

Thank you.

Barry.

Re: PBC + floor plan cut plane heigh - floor plan representa

alemanda — Fri, 11 Dec 2015 07:46:04 GMT

NCornia wrote:
Hello All,

Thank you for bringing this up. I'll take a look into it and report it in our internal database.

Best regards,

Hope it could be solved soon.