topic Re: Elevation drawing Problem in Modeling

Elevation drawing Problem

Anonymous — Thu, 05 Mar 2015 15:27:31 GMT

Hi everyone;

North view of my project was that picture (pic - 1). But took this form after struggling with something (pic - 2). Also I do not see my windows in the floor plan. How do I go back into the past (look like pic - 1). What settings I need to change . I need your help . Thank you all...

Pic - 1

Pic - 2

Re: Elevation drawing Problem

Dontknow — Thu, 05 Mar 2015 18:26:35 GMT

I think you must set your 'model view options'.
You can also set it at 'Quick Options'.

Re: Elevation drawing Problem

Steve Jepson — Thu, 05 Mar 2015 20:18:49 GMT

or here ?

Re: Elevation drawing Problem

Anonymous — Fri, 06 Mar 2015 07:37:09 GMT

Thank you so so much! My elevation view problem was solved by you. However, doors and windows in the floor plan still does not appear. Do you have any information about this problem? Thank you again...

Steve wrote:
or here ?

Re: Elevation drawing Problem

Steve Jepson — Fri, 06 Mar 2015 07:55:20 GMT

could be missing library or library needs to be reloaded. ?

Re: Elevation drawing Problem

David Maudlin — Fri, 06 Mar 2015 14:19:23 GMT

bestordu wrote:
However, doors and windows in the floor plan still does not appear. Do you have any information about this problem?

Look at Model View Options > Options for Construction Elements > Door Options. Or this could be due to the height of the Floor Plan Cut Plane if the Walls and Doors are not set to Symbolic.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.

David