https://community.graphisoft.com/t5/Modeling/ARCHICAD-22-STAIR-VERTICAL-SUPPORT-OFFSET/m-p/255096#M134270 <DIV class="actalk-migrated-content"><T>I am trying to detail my floating stair with vertical supports. I have a 1" nosing which seems to be impacting the location of the vertical support(throwing it off center). Is there not a way to fix this so it shows properly in my building section? <BR /> <BR /> I would also like to shift the stringer down a little to allow some space between the bottom of the tread and the top of the stringer on the back riser side of the tread. I was able to get the tread to show as I wanted(in the FINISH ---&gt; FLIGHT - TREAD) but the tread plate and the vertical support were still the same distance above the stringer so there was a space between the structure of the stair and the tread.</T></DIV> Thu, 25 May 2023 14:36:05 GMT Anonymous 2023-05-25T14:36:05Z https://community.graphisoft.com/t5/Modeling/ARCHICAD-22-STAIR-VERTICAL-SUPPORT-OFFSET/m-p/255096#M134270 <DIV class="actalk-migrated-content"><T>I am trying to detail my floating stair with vertical supports. I have a 1" nosing which seems to be impacting the location of the vertical support(throwing it off center). Is there not a way to fix this so it shows properly in my building section? <BR /> <BR /> I would also like to shift the stringer down a little to allow some space between the bottom of the tread and the top of the stringer on the back riser side of the tread. I was able to get the tread to show as I wanted(in the FINISH ---&gt; FLIGHT - TREAD) but the tread plate and the vertical support were still the same distance above the stringer so there was a space between the structure of the stair and the tread.</T></DIV> Thu, 25 May 2023 14:36:05 GMT https://community.graphisoft.com/t5/Modeling/ARCHICAD-22-STAIR-VERTICAL-SUPPORT-OFFSET/m-p/255096#M134270 Anonymous 2023-05-25T14:36:05Z