https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267917#M139873 Hello,<BR /> <BR /> Is it a 3D cut ?<BR /> Did you check you layer priority between the 2 views ? Wed, 30 Oct 2019 17:51:50 GMT Christophe Fortineau 2019-10-30T17:51:50Z https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267916#M139872 <DIV class="actalk-migrated-content"><T>I've managed to get my walls perfectly in 2d, but in 3d they don't look the same. <BR /> <BR /> Any idea why?;)</T></DIV> Tue, 09 May 2023 14:19:41 GMT https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267916#M139872 Anonymous 2023-05-09T14:19:41Z https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267917#M139873 Hello,<BR /> <BR /> Is it a 3D cut ?<BR /> Did you check you layer priority between the 2 views ? Wed, 30 Oct 2019 17:51:50 GMT https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267917#M139873 Christophe Fortineau 2019-10-30T17:51:50Z https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267918#M139874 I assume 2d and 3d layer priorities are the same thing?<BR /> <BR /> ..and yes, it's a 3d cut of the same wall Wed, 30 Oct 2019 18:13:35 GMT https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267918#M139874 Anonymous 2019-10-30T18:13:35Z https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267919#M139875 Could you put a horizontal cutting plane that cuts through your door similar to the 2D? Your 3D selection looks like it shows BM intersections with a slab or something above... Thu, 31 Oct 2019 01:50:27 GMT https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267919#M139875 Lingwisyer 2019-10-31T01:50:27Z https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267920#M139876 <BLOCKQUOTE>famadorian wrote:<BR /> I assume 2d and 3d layer priorities are the same thing? </BLOCKQUOTE> <BR /> Your layer intersection priority numbers are saved with each layer combination and can be different.<BR /> If you are opening the 2D and 3D with views, check that those views are using the same layer combination.<BR /> If they use different layer combinations (which is fine), then check that the layer priority numbers are the same in each combination.<BR /> If the numbers are different the walls will not trim together.<BR /> <BR /> Barry. Thu, 31 Oct 2019 02:46:20 GMT https://community.graphisoft.com/t5/Modeling/Intersection-Priority-Correlation-between-2d-and-3d/m-p/267920#M139876 Barry Kelly 2019-10-31T02:46:20Z