topic Re: change surface material of underside of door opening in Modeling https://community.graphisoft.com/t5/Modeling/change-surface-material-of-underside-of-door-opening/m-p/269255#M140494 Select the Door and go to its Settings Dialog.<BR /> In the Model panel, in the Wall Opening Surface filed you have two option: Same as Wall Edge and Same as Wall Side. Try both to see if they give the result you are after.<BR /> <BR /> You could also use the first option (Same as Wall Edge) and select the Wall and override its Edge surface, and the bottom Wall edge at the Door will also be displayed with this Surface (this will of course override all Edge surfaces of the Wall but that may not be a problem in your case). Thu, 14 May 2015 13:22:32 GMT Laszlo Nagy 2015-05-14T13:22:32Z change surface material of underside of door opening https://community.graphisoft.com/t5/Modeling/change-surface-material-of-underside-of-door-opening/m-p/269254#M140493 <DIV class="actalk-migrated-content"><T>Is there a way to change the surface or building material of the underside of a door opening? For some reason it is not matching what the rest of the wall is (stucco in this case). Thanks for your help.</T></DIV> Wed, 24 May 2023 06:50:20 GMT https://community.graphisoft.com/t5/Modeling/change-surface-material-of-underside-of-door-opening/m-p/269254#M140493 arg617 2023-05-24T06:50:20Z Re: change surface material of underside of door opening https://community.graphisoft.com/t5/Modeling/change-surface-material-of-underside-of-door-opening/m-p/269255#M140494 Select the Door and go to its Settings Dialog.<BR /> In the Model panel, in the Wall Opening Surface filed you have two option: Same as Wall Edge and Same as Wall Side. Try both to see if they give the result you are after.<BR /> <BR /> You could also use the first option (Same as Wall Edge) and select the Wall and override its Edge surface, and the bottom Wall edge at the Door will also be displayed with this Surface (this will of course override all Edge surfaces of the Wall but that may not be a problem in your case). Thu, 14 May 2015 13:22:32 GMT https://community.graphisoft.com/t5/Modeling/change-surface-material-of-underside-of-door-opening/m-p/269255#M140494 Laszlo Nagy 2015-05-14T13:22:32Z