topic Re: Outline of Adjoined Beams in Plan in Modeling

Outline of Adjoined Beams in Plan

lukegolesh — Fri, 26 May 2023 10:25:30 GMT

Hi All,

Is it possible to display the end lines of beams that are adjoined?

Re: Outline of Adjoined Beams in Plan

Lingwisyer — Tue, 13 Oct 2020 02:05:56 GMT

Put them on a layer with an Intersection Group of zero?

Ling.

Re: Outline of Adjoined Beams in Plan

lukegolesh — Tue, 13 Oct 2020 17:23:03 GMT

Perfect! Thank you!!

Re: Outline of Adjoined Beams in Plan

Barry Kelly — Wed, 14 Oct 2020 01:47:29 GMT

Lingwisyer wrote:
Put them on a layer with an Intersection Group of zero?

lukegolesh wrote:
Perfect! Thank you!!

Just make sure that you change the layer intersection group just in the layer combination used to show that particular plan.
You won't want to do it in layer combinations used for elevations, sections and 3D views.
Otherwise your beams will not trim in those views.

Barry.

Re: Outline of Adjoined Beams in Plan

lukegolesh — Mon, 26 Oct 2020 19:53:06 GMT

Thanks Barry, I always appreciate your input.

This is a little unorthodox, but in this case, I'm using it for 2x framing, so I want it to never automatically join/ trim with each other or other elements regardless of the view (as if they were actual 2xs). So I created a new layer and went through and changed the intersection group of every layer combination to 0. Kind of a pain, but it will be part of future templates. I also use it for scissor and other custom trusses (trusses generally actually). I draw a complex profile of the truss and then a beam with a length of 1 1/2" (2x). (Under dormers, I have paired scissor trusses where I need to show the line in between). It works out really quite well. I have full control this way without messing around with the truss tool and one place where I can change all of the trusses of a type. Maybe some day I'll mess with the truss tool though 😉

Re: Outline of Adjoined Beams in Plan

Lingwisyer — Tue, 27 Oct 2020 01:23:56 GMT

lukegolesh wrote:
So I created a new layer and went through and changed the intersection group of every layer combination to 0.

You can use the Attribute Manager to modify multiple Layer Combinations at once.

Ling.

Re: Outline of Adjoined Beams in Plan

Barry Kelly — Fri, 13 Nov 2020 01:38:31 GMT

There seems to be a better solution than changing the layer intersection priority.

https://archicad-talk.graphisoft.com/viewtopic.php?f=20&t=71279&p=318916#p318914

Barry.

Re: Outline of Adjoined Beams in Plan

Lingwisyer — Fri, 13 Nov 2020 04:49:13 GMT

Barry wrote:
There seems to be a better solution than changing the layer intersection priority.

Only shows a dividing line when the beam slopes change. The beams will also be adjusted to finish the connections which may not be suitable in this situation.

Ling.