topic Stringer too long in Modeling

Stringer too long

Toshi — Wed, 20 Oct 2021 13:48:06 GMT

Hi there !

I'm completely new here and this is my first Posting. I'm an architect from germany and I will start a new Job in a new firm using AC25 on Nov. 1st. Actually it is a Real Estate firm and I will be the first architect there, so there is nobody yet to ask. Now and during the past week I've been practising with the 30-Day-Trial version and, as you can imagine, I encountered hundreds of questionmarks. The documentation and help [F1] isn't that much of a help. (you should see what Revit provides when you hit F1 !!). so I hope that I can find some help here even on dumb questions and you'll be patient with me 😄

here's my first question: How do I manage, that the stringer ends with the most upper step and doesn't continues into the ceiling/floor ..

Re: Stringer too long

Raquel Aoni — Wed, 20 Oct 2021 14:29:27 GMT

Hi Toshi, it seems that you have the top connection not configured as you need. Try changing the Support Connections. You can access it under the Structure > Flight - Stringers > Support Connections. On this tab, you will find an image of a stair. Click on the area where you want to set up correctly. It will be highlighted in blue, then change the Flight-End to the best fit for your design.

Let me know if this is what you were looking for.

Cheers!

Re: Stringer too long

Gordana Radonic — Wed, 20 Oct 2021 14:57:35 GMT

Hey @Toshi,

Happy to have you here and thanks for your first post! I am sure you can turn to your local Graphisoft support channel for any help you need, and it's also worth checking the very active forum on your native language: https://forum.graphisoft.de/.

Of course, we are happy to have you here on the international community 🙂

Gordana

Re: Stringer too long

Toshi — Fri, 22 Oct 2021 09:22:07 GMT

Hello Rachel

Thanks for the advice ! Now it looks the way I wanted.