topic What should I do if the wall connection is abnormal? in Modeling

What should I do if the wall connection is abnormal?

LeeJaeYoung — Wed, 08 Jun 2022 11:23:55 GMT

What should I do if the wall connection is abnormal?

What should I study?

https://drive.google.com/file/d/158ynHLPPX5e80R6cT3n_r6ao9nTRd8Iu/view?usp=sharing

Re: What should I do if the wall connection is abnormal?

Christophe Fortineau — Wed, 08 Jun 2022 19:57:03 GMT

Despite moving the reference lines of each wall (in pairs), I did not manage to create a perfect match and I came to a radical and effective solution. I make a personalized column profile on which the 4 walls are connected without crossing.

Re: What should I do if the wall connection is abnormal?

Mahmoud Qenawi — Wed, 08 Jun 2022 20:29:58 GMT

I see this post will benefit you much

https://community.Graphisoft.com/t5/Design-forum/Composite-walls-wrkflow/td-p/326159

Re: What should I do if the wall connection is abnormal?

LeeJaeYoung — Wed, 08 Jun 2022 23:36:13 GMT

I don't quite understand.
I would appreciate it if you could show me a more detailed explanation or image.

Re: What should I do if the wall connection is abnormal?

Christophe Fortineau — Sat, 11 Jun 2022 18:55:07 GMT

Hello LeeJaeYoun,

Here is some image of the principle of a custom post to join 4 walls.

Re: What should I do if the wall connection is abnormal?

LeeJaeYoung — Sun, 12 Jun 2022 05:56:37 GMT

thank you ^^

What you're saying is that it's good to have a complex column at the joint point.
Is this the default way in Archicad?
With columns and walls ...solve all planes.

May I ask you one more question?
How do you deal with liquid waterproofing and wallpaper?
I'm thinking of treating the liquid waterproofing with Morph.
However, I am thinking about what to do with the wallpaper.

Re: What should I do if the wall connection is abnormal?

Christophe Fortineau — Sun, 12 Jun 2022 09:22:45 GMT

Hello,

"What you're saying is that it's good to have a complex column at the joint point."

You are right but what I am saying is to get a solution about your request 😉

Please note that it is nevertheless necessary to plan to modify the classification of the connection column. It is not a column but a wall which must therefore be exported as type ifcwall.

"Is this the default way in Archicad?"

I do not think so ! It is mine for sure.

"How do you deal with liquid waterproofing and wallpaper?"
I use SEO to get watter into a gsm object about a pool or watter into a mesh to get a pond.

About wallpaper I only use model tab like below but you are able to use morph too.

Re: What should I do if the wall connection is abnormal?

LeeJaeYoung — Sun, 12 Jun 2022 15:01:48 GMT

Thank you so much

Re: What should I do if the wall connection is abnormal?

LeeJaeYoung — Sun, 12 Jun 2022 15:27:21 GMT

I'll ask you one more question ^^
How do I get the concrete face treatment process to appear on the schedule?
Concrete Face Treatment: To level the concrete surface by grinding the concrete surface.

Re: What should I do if the wall connection is abnormal?

Christophe Fortineau — Sun, 12 Jun 2022 17:00:08 GMT

LeeJaeYoung,

I am not able tu understand your request with my poor english 😕

Re: What should I do if the wall connection is abnormal?

LeeJaeYoung — Mon, 13 Jun 2022 01:36:18 GMT

In the construction process, in Korea, there is a process of applying mortar on the concrete interior surface and tile it, and in some cases, the concrete interior surface is ground and cleaned.

(a process of grinding and cleaning the concrete surface with a grinder to flatten it)
Then you have to specify something on the interior surface of the concrete...

I asked you because I was wondering if it's okay to do it with zero or if you're doing it in a different way.

Re: What should I do if the wall connection is abnormal?

Christophe Fortineau — Mon, 13 Jun 2022 05:41:37 GMT

Hello,

"I asked you because I was wondering if it's okay to do it with zero or if you're doing it in a different way."

Personally, if a material has a layer of zero thickness, then I do not represent it because it will be invisible at 1/50 and I can differentiate the final appearance of a wall by other means.

Re: What should I do if the wall connection is abnormal?

LeeJaeYoung — Mon, 13 Jun 2022 06:51:51 GMT

Sorry to keep asking.
Question 1. I'm curious to know how to deal with content that is specific to the building process and process it in the schedule.
A thickness of 0 is the process the workers work in, and it has nothing to do with the shape.
Since it is surface that count, I am curious to know how you do it.

I used translate.google.com ^^