topic Re: Floorplan finishes / textures in Modeling

Floorplan finishes / textures

miapointon99 — Wed, 27 Jul 2022 04:01:59 GMT

Hi there

Is there a way on plan view to show the objects surface fill. I am designing a kitchen and want to show texture of the benchtop but can't seem to figure out how.

Image below is what I am trying to achieve

Thank you for your help

Re: Floorplan finishes / textures

Andrii Levko — Wed, 27 Jul 2022 04:58:37 GMT

For plans you can use Image Fills and Gradient Fills as well. By default, Archicad has two Image Fills as Attributes, but you can define your own.

https://help.Graphisoft.com/AC/24/INT/#t=_AC24_Help%2F070_Documentation%2F070_Documentation-18.htm&rhsyns=%20

If you have AC25, you can use Surface Texture but only for Section, Elevation/Interior Elevation and Viewpoints.

Re: Floorplan finishes / textures

mija — Wed, 27 Jul 2022 06:20:28 GMT

Hi, in AC25 you can also have surface texture fill but with fills.

Re: Floorplan finishes / textures

DGSketcher — Wed, 27 Jul 2022 07:47:23 GMT

You could try making a 3D Document from plan and on your Layout sheet overlay the 2d plan on the 3D document. You can send the 3D document to the back in Display order if necessary. This way it will save you managing all the cut outs for surface appliances and it will automatically update if you change the kitchen layout.

Re: Floorplan finishes / textures

miapointon99 — Wed, 27 Jul 2022 21:09:20 GMT

Thank you Andrii.

I have sorted out how to do the cut fills. Another question... I am now trying to make the cabinets have a transparent fill so I can have the benchtop underneath to show where the cabinets sit. Do you know how to do this? I am using CI cabinets.

Re: Floorplan finishes / textures

Andrii Levko — Wed, 27 Jul 2022 22:32:24 GMT

Hi,

As for Ci cabinets it's hard to say, I have never used the CI tool.
Maybe you should to create a new topic for CI cabinets.

But you can make a couple of cut views in View map, with high as you want using the Floor Plan Cut Plane.
To set the Cut Plane, go to Document > Floor Plan Cut Plane and then just overlay on view with the benchtop on layouts.

Please indicate which version of Archicad do you use.

Re: Floorplan finishes / textures

Andrii Levko — Wed, 27 Jul 2022 22:12:24 GMT

Floor Plan Cut Plane

https://help.Graphisoft.com/AC/25/INT/_AC25_Help/050_ViewsVB/050_ViewsVB-11.htm