topic Re: Beam overhead lines above ceiling in Modeling

Beam overhead lines above ceiling

jenkashevchenko — Wed, 28 Sep 2022 13:19:01 GMT

hello, everybody.

I have such situation on the floor plan: 1.Floor(slab) - 2.cut plane above 1.Floor - 3.tilted beam above 2.cut plane - 4.ceiling(slab) above part of 3.tilted beam - and another part of 3.tilted beam above 4.ceiling. There is an overhead line of full beam on the floor plan, but should be only part(under ceiling). What should I do to hide part of the beam above 4.ceiling(slab)?

AC24

thanks

Re: Beam overhead lines above ceiling

Laszlo Nagy — Fri, 22 Oct 2021 15:25:03 GMT

It would be best if you posted a few screenshots so we can see what the exact situation is.

Re: Beam overhead lines above ceiling

jenkashevchenko — Sat, 23 Oct 2021 07:21:46 GMT

I've posted few pictures, hope it will help to understand the problem. Pic.1 - section, Pic.2 - floor plan, Pic.3 - floor plan that should be.

Re: Beam overhead lines above ceiling

Laszlo Nagy — Mon, 25 Oct 2021 00:01:31 GMT

Try these settings for the Beam as shown in the screenshot:

1. "Floor Plan Display" field to "Projected with Overhead".

2. "Projection Mode" to "Hybrid", and "Overhead" to "Projected".

3. "Show Projection" to "To Floor Plan Range".