topic Re: Problems with colouring the walls in Modeling

Problems with colouring the walls

Ninox — Tue, 27 Jun 2023 22:05:32 GMT

These walls are both set to be all white, but the one on the left doesn't change. Both walls were "cropped" to fit to the roof. I just don't know what to do 😞 Please help

Re: Problems with colouring the walls

Lingwisyer — Wed, 28 Jun 2023 01:35:02 GMT

You have a Solid Element Operation acting on that wall. Check to make sure you are not removing the outside face of your wall and revealing the core.

Ling.

Re: Problems with colouring the walls

Barry Kelly — Wed, 28 Jun 2023 01:54:33 GMT

@Lingwisyer wrote:

You have a Solid Element Operation acting on that wall. Check to make sure you are not removing the outside face of your wall and revealing the core.

Or it was set to adopt the surface of the operator.

Barry.

Re: Problems with colouring the walls

Lingwisyer — Wed, 28 Jun 2023 01:56:17 GMT

Either way, the surface that the override is affecting has been removed.

Re: Problems with colouring the walls

Barry Kelly — Wed, 28 Jun 2023 02:08:37 GMT

Not necessarily.

The 'Connection' is probably just the crop to the roof, so is possibly not affecting the face of the wall at all.

Barry.