topic How to make a window visible in a floor plan? in Modeling

How to make a window visible in a floor plan?

LeeJaeYoung — Mon, 04 Sep 2023 00:50:49 GMT

The problem is that GL is on the first floor and the gap between it and the first floor is only 100mm, so the windows do not appear on the first floor.
How can I show it?

2. Of course, if the wall standard is GL, it is visible from the GL floor.
The problem is that the window is so high that the Cut Height cannot be raised that much.
What should I do?

Re: How to make a window visible in a floor plan?

LeeJaeYoung — Mon, 04 Sep 2023 01:02:36 GMT

I thought wrong.
I only changed the cut plane height from 1000 to 50...
The floor needs to be 2nd floor.
sorry.

Re: How to make a window visible in a floor plan?

Lingwisyer — Mon, 04 Sep 2023 01:53:41 GMT

If your FPCP cuts the wall in question, and the wall is set to display on the relevant storey, you can set the wall to Symbolic Cut. This will make all the doors and windows hosted in the wall to appear cut even if the FPCP does not actually cut them.

Ling.

Re: How to make a window visible in a floor plan?

LeeJaeYoung — Mon, 04 Sep 2023 02:03:18 GMT

It is meaningless if you do not touch the relative floor plan range. ^^
Thank you for answer.

Re: How to make a window visible in a floor plan?

Lingwisyer — Mon, 04 Sep 2023 02:13:19 GMT

If you are only "cutting" the window and not the wall, an option would be to place a second window in a wall above and turn off it's 3D display, then seperate it's classification so that your can exclude it from your schedules.

Re: How to make a window visible in a floor plan?

LeeJaeYoung — Mon, 04 Sep 2023 02:19:57 GMT

thank you so much ^^