topic Re: How to build a sloping wall like that? in Modeling

How to build a sloping wall like that?

LeeJaeYoung — Mon, 11 Sep 2023 23:43:13 GMT

1. elevation

2. plan

Re: How to build a sloping wall like that?

Patrick M — Mon, 11 Sep 2023 23:57:41 GMT

something like this:

Re: How to build a sloping wall like that?

Patrick M — Mon, 11 Sep 2023 23:58:12 GMT

you can get the same opening on some windows, or you can just model them as 2 separeate windows; one for the unit, the other for the wall hole

Re: How to build a sloping wall like that?

LeeJaeYoung — Tue, 12 Sep 2023 00:13:05 GMT

Thank you for your interest.
I think it's a little different.
The structure was not changed, but the finishing wall was changed.

1. Don’t I need to separate the wall for this type of wall?
2. I think the key is how to connect the finished wall to the inwardly slanted lower part.

Re: How to build a sloping wall like that?

LeeJaeYoung — Tue, 12 Sep 2023 05:20:16 GMT

Shouldn’t the finished wall and the structural wall be separated?

How should I build the wall?
The walls from the left and right and the walls from the top and bottom must be connected like this.
What should I use for the walls at the top and bottom to connect them like that?

Re: How to build a sloping wall like that?

LeeJaeYoung — Tue, 12 Sep 2023 14:14:45 GMT

All I know is how to morph something.
Only the upper and lower walls are made into morphs, the rest are walls.
The overlapping part of the diagonal line was removed by SOEing the wall.

But is it okay to leave the wall created with morph as is?
Do I need to add SOE to any wall?

Re: How to build a sloping wall like that?

Patrick M — Wed, 13 Sep 2023 22:22:01 GMT

the shape you have shown as a morph may need to be broken up, and used as operators on the wall finish using solid element operations.

Re: How to build a sloping wall like that?

LeeJaeYoung — Thu, 14 Sep 2023 01:15:31 GMT

Can you please explain a little longer?
1. I don’t understand the meaning of broken up.
2.I would like to know what the purpose of using solid element operations is.

Thank you for your interest.^^