topic Re: Wall junction issue with different height walls in Modeling

Wall junction issue with different height walls

amitchristian — Fri, 10 Nov 2023 23:25:43 GMT

when low height wall is passing through end of full height walls.

Wall end junction graphics does not show correct cut pen for full height wall. Please review attached screenshot with plan and 3D view.

We have to split the low height wall at each junction to resolve this. Is this known issue?

Re: Wall junction issue with different height walls

Mahmoud Qenawi — Tue, 07 Nov 2023 13:06:17 GMT

You can try display order function to bring forward the high height wall above the low one,

Or to increase junction order value for the high wall height.

I hope that helps.

Re: Wall junction issue with different height walls

amitchristian — Tue, 07 Nov 2023 13:35:06 GMT

attached please find the PLN file. Display order function does not work.

Re: Wall junction issue with different height walls

filip — Tue, 07 Nov 2023 14:31:52 GMT

I don't have Archicad right now to try it, but you could try to change the Layer intersection of the low wall layer. I think it should work

Re: Wall junction issue with different height walls

Mahmoud Qenawi — Tue, 07 Nov 2023 17:35:54 GMT

I downloaded your file & tried my two tricks but no way, only the way @filipsuggested is the right one.

Re: Wall junction issue with different height walls

Laszlo Nagy — Fri, 10 Nov 2023 23:35:46 GMT

Place the Reference Line of the low height walls to the other side.

Re: Wall junction issue with different height walls

amitchristian — Mon, 20 Nov 2023 07:07:55 GMT

thanks

yes, we have manually tweak elements for reference line or split walls at junctions.

But there should not be requirement for any such manual adjustment. Archicad should show clean graphics as default settings with cut walls showing correct cut pen.