topic Re: All walls not showed joined on plan, but in 3D is fine in Modeling

All walls not showed joined on plan, but in 3D is fine

Chris_Lz — Mon, 01 Jan 2024 16:05:33 GMT

Help, I have a serious problem.

After my project shutdown by itself due to an ArchiCAD bug, when I opened it, ArchiCAD did repairs and now the walls are not showed joined, although in 3D is perfect.

I have attached some screenshots.

This is happening for every wall intersection, internal and externals.

Also, if I split a wall in two pieces, now it shows the line between them, previously it was a seamless joint.

Even if I make a new wall, composite or simple, is doing the same thing.

And that 'Clean wall and beam intersection' is on.

I don't know what to to.

Thanks

Re: All walls not showed joined on plan, but in 3D is fine

Mahmoud Qenawi — Sun, 31 Dec 2023 18:44:03 GMT

Check that all layers are visible, it seems that yiu have columns or some elements in a hidden layer.

Re: All walls not showed joined on plan, but in 3D is fine

Chris_Lz — Wed, 03 Jan 2024 08:32:52 GMT

Absolutely nothing worked until I reinstalled ArchiCAD and now it shows everything normally.

Re: All walls not showed joined on plan, but in 3D is fine

cuba — Wed, 03 Jan 2024 10:57:23 GMT

Probably just turned off clean wall & beam intersections (not needed to reinstall)

Re: All walls not showed joined on plan, but in 3D is fine

Chris_Lz — Wed, 03 Jan 2024 11:14:24 GMT

Already tried that, it was one of the first things to do.

Nothing worked, it was probably a software bug.