topic Re: Complex Profile - Stretch Modifier impacting plates? in Modeling

Complex Profile - Stretch Modifier impacting plates?

architect — Thu, 04 Jan 2024 22:45:26 GMT

I built the wall at 8', and adjusted it in the model to be taller/shorter, one of my four 2X's is shrinking as the height of the wall shrinks, so the lower plate is 1 1/2" while the other is 1 7/32"..?

(model view)

(profile manner view)

Operating system used: Mac Apple Silicon

Re: Complex Profile - Stretch Modifier impacting plates?

Barry Kelly — Mon, 08 Jan 2024 05:23:30 GMT

Everything within the height modifier lines will stretch proportionally.

As one of you bottom plates is withing the height modifier extents, that is why it is stretching.

Barry.

Re: Complex Profile - Stretch Modifier impacting plates?

architect — Thu, 15 Feb 2024 19:20:58 GMT

Thanks Barry, I missed that line.

Is there a way to prevent top plate Width from being stretched, but still stretch the rest of the wall?

Re: Complex Profile - Stretch Modifier impacting plates?

Lingwisyer — Fri, 16 Feb 2024 01:31:24 GMT

Same thing as with the height stretch. There are two lines defining the width stretch zone.

Ling.

Re: Complex Profile - Stretch Modifier impacting plates?

Barry Kelly — Sat, 17 Feb 2024 06:11:57 GMT

@architect wrote:

Is there a way to prevent top plate Width from being stretched, but still stretch the rest of the wall?

Sure.

The width modifier won't help here because the wall plate is inside the wall width.

But you can create separate modifiers that will work only on the width of the wall skins.

Or the wall plate itself.

Barry.

Re: Complex Profile - Stretch Modifier impacting plates?

Lingwisyer — Fri, 16 Feb 2024 04:31:40 GMT

Do not include the entire wall plate, or in the case, stud in the Width Stretch, else it will be centered on your stretch. Add an Offset Modifier to the element which you do not want to be stretching.