topic Enclosing space under stairs in Modeling

Enclosing space under stairs

Anonymous — Thu, 02 May 2024 13:24:52 GMT

I would like to create a wall to enclose the space under a staircase. The wall would be the height of the other interior walls on one end but would follow the slope of the stair carriage to a height of about 7" on the other. I can't find how to accomplish this. I'm attaching a picture of the stairs and another picture that will show what I'm trying to accomplish.

Thanks for the help.

Re: Enclosing space under stairs

Gerald Hoffman — Mon, 21 Jul 2008 21:13:46 GMT

I will assume you don't have Cigraph's ArchiStair which will put a wall under the stair.

The easiest way I have found is to use a roof at the slope of the under side of the stair. Position it in a section with the bottom of the roof plane where you would like the cut angle to be. Then use SEO to subtract the wall above your SEO roof plane.

Re: Enclosing space under stairs

Anonymous — Tue, 22 Jul 2008 01:16:09 GMT

I would try SEO first. It used to be hit or miss with stairs but has been pretty reliable since AC9. This saves fussing with another part and the wall will automatically follow changes in the stairs.

Re: Enclosing space under stairs

vistasp — Tue, 22 Jul 2008 03:18:52 GMT

Simple SEO works pretty well as can be seen from the attached image.

Re: Enclosing space under stairs

Anonymous — Tue, 22 Jul 2008 15:09:59 GMT

I understand about how to add a roof and trim the wall to match that plane. However, what is SEO?

Re: Enclosing space under stairs

Dwight — Tue, 22 Jul 2008 16:03:50 GMT

Solid Element Operation

US Reference Guide 352

Re: Enclosing space under stairs

Anonymous — Tue, 22 Jul 2008 19:48:20 GMT

Placing a wall under the stairs and seo works perfect every time.

Re: Enclosing space under stairs

Anonymous — Tue, 22 Jul 2008 21:02:24 GMT

Got it! That was actually easy. The hardest part about ArchiCad is learning the terminology.