topic stairmaker ac9 in Modeling

stairmaker ac9

Anonymous — Thu, 25 May 2023 15:03:20 GMT

I am looking for an alternative to stairmaker. I need to model many different stairs and railings (mostly existing), and have grown tired of STMK limitations. I also would like to have a stair in my plans that actually demonstrate I have handrails and handrail extensions on my stairs.

I have read a little about smartparts and archistair, and have no idea how these compare, some in-use information would be very helpful.

Thanks

Christopher Sipes, R.A.

PMG5 2.0 Ghz dual, 2.5 GHz RAM, 160 GB, AC 9.0

Re: stairmaker ac9

Djordje — Tue, 23 Aug 2005 19:09:44 GMT

cdsipes wrote:
I am looking for an alternative to stairmaker. I need to model many different stairs and railings (mostly existing), and have grown tired of STMK limitations.

ArchiStair by Cigraph. Go to http://www.cigraph-store.com/html/home/CIG-INDEX.htm

Re: stairmaker ac9

Anonymous — Tue, 23 Aug 2005 20:06:08 GMT

Djordje, is this what you use? If so, that is enough of an endorsement for me....

Are there any other "must have" add-ons?

Thanks a ton

Christopher Sipes

MacOS 10.4.1, PMG5, 2.0 Ghz dual, 2.5 MB RAM AC9.0

Re: stairmaker ac9

Anonymous — Tue, 23 Aug 2005 23:53:17 GMT

maybe not must-haves, but depending on what you're doing, pretty much anything from cigraph can be very useful. Their site & massing programme saves me loads of time doing site surveys, for instance.

cheers,
dan

Re: stairmaker ac9

Stephen Dolbee — Wed, 24 Aug 2005 12:46:56 GMT

cdsipes wrote:
Are there any other "must have" add-ons

Door/Window Builder by Cadimage.

Steve

Re: stairmaker ac9

Achille Pavlidis — Wed, 24 Aug 2005 13:08:03 GMT

i'm actually using Stairmaker and its pretty good... although it lacks one feature i think it is important... the possibility to have more than on landing... you can always ad one with a slab but the railing is discontinued...

Re: stairmaker ac9

TomWaltz — Wed, 24 Aug 2005 13:37:58 GMT

Stephen wrote:
cdsipes wrote:
Are there any other "must have" add-ons
Door/Window Builder by Cadimage.

Steve

I used to believe that.... until I learned how to make completely custom doors/windows on the fly using the "custom panel" and "custom grid" options on most objects.

Granted, there are some limitations to that method, but I found Door / Window Builder to be pretty cumbersome, bioth in the sense of using it and in the sense of performance. I found the D/W objects really slowed down elevation regeneration time compared to the GS and SmartPart windows.