https://community.graphisoft.com/t5/Modeling/beam-column-joint/m-p/698986#M179235 <P>Probably going into 3D and displaying only the relevant Columns and Beams. You can probably select multiple Columns, then change their height in a single step, either by typing the new height in the Info Box, or by adjusting their height graphically using the Pet Palette. If you have several Columns selected and you adjust the height of one of them graphically, all of them will be adjusted.</P> Thu, 09 Apr 2026 12:53:26 GMT Laszlo Nagy 2026-04-09T12:53:26Z https://community.graphisoft.com/t5/Modeling/beam-column-joint/m-p/698959#M179234 <P>My beam height are different. so, I need to adjust my column height according to my beam. What is the easies way?</P><P>&nbsp;</P> Thu, 09 Apr 2026 10:57:03 GMT https://community.graphisoft.com/t5/Modeling/beam-column-joint/m-p/698959#M179234 SA-shoji 2026-04-09T10:57:03Z https://community.graphisoft.com/t5/Modeling/beam-column-joint/m-p/698986#M179235 <P>Probably going into 3D and displaying only the relevant Columns and Beams. You can probably select multiple Columns, then change their height in a single step, either by typing the new height in the Info Box, or by adjusting their height graphically using the Pet Palette. If you have several Columns selected and you adjust the height of one of them graphically, all of them will be adjusted.</P> Thu, 09 Apr 2026 12:53:26 GMT https://community.graphisoft.com/t5/Modeling/beam-column-joint/m-p/698986#M179235 Laszlo Nagy 2026-04-09T12:53:26Z