topic Re: Bevel wall edges? in Modeling

Bevel wall edges?

Anonymous — Sat, 01 Mar 2008 21:43:04 GMT

Hello, is it possible to bevel corner edges on walls, so that they are not 90 degrees sharp but a little bit round?

Re: Bevel wall edges?

Anonymous — Sat, 01 Mar 2008 22:15:56 GMT

rune1980 wrote:
Hello, is it possible to bevel corner edges on walls, so that they are not 90 degrees sharp but a little bit round?

You can try the "Fillet" command (using a small radius) for joining the two walls.

Re: Bevel wall edges?

Anonymous — Sat, 01 Mar 2008 22:24:31 GMT

Thanks adytc it works, but do you know whether it is possible to do it on one side only?

Re: Bevel wall edges?

Dwight — Sat, 01 Mar 2008 22:43:09 GMT

You'd be using the polygon wall for that.

Re: Bevel wall edges?

Anonymous — Sat, 01 Mar 2008 23:00:56 GMT

Dwight that does the opposite way that i want? I want it to bevel on the inner corner and not outer..

Re: Bevel wall edges?

Dwight — Sat, 01 Mar 2008 23:15:20 GMT

Duffus!
You can do anything with the polygon wall!!

Re: Bevel wall edges?

Anonymous — Sat, 01 Mar 2008 23:20:30 GMT

rune1980 wrote:
Dwight that does the opposite way that i want? I want it to bevel on the inner corner and not outer..

You can bevel the inner corner too (see attached image). Just play with your wall as if it was a slab. For getting a correct display in 2d, you can modify the way wall end lines are showing.

Cheers.

Adrian Tudoreanu

Re: Bevel wall edges?

Dwight — Sat, 01 Mar 2008 23:27:42 GMT

The reason i posted that image is to show that the polygonal wall can now support window objects like a real wall can.

I remember a time when this was not possible, relegating the polygon wall to mere infill status.

Re: Bevel wall edges?

Anonymous — Sat, 01 Mar 2008 23:35:20 GMT

Okay bout how would you do this quickly?

Re: Bevel wall edges?

Dwight — Sat, 01 Mar 2008 23:57:19 GMT

Is this a metal angle?
For verticals, a slab, for horizontals, a custom profile wall and for general elements, an object - the L beams 11.

Re: Bevel wall edges?

Anonymous — Sun, 02 Mar 2008 00:13:10 GMT

Alright.. thank you both, i have managed to to do it now. Thank you for your time.

Re: Bevel wall edges?

Anonymous — Mon, 03 Mar 2008 17:59:13 GMT

One question more .. is it possible to change the window/door holes as well?

Re: Bevel wall edges?

Anonymous — Tue, 04 Mar 2008 11:47:24 GMT

I would recommend using custom profile column or separate polygonal wall to only fill the inside of the corner if composite wall is used but unfortunately it wouldn't clean up in 2D. The complex profile column doesn't intersect with walls as traditional column would. With outside corner the SEO with hidden layer element would be the best way IMO.

Re: Bevel wall edges?

Anonymous — Tue, 04 Mar 2008 12:09:15 GMT

rune1980 wrote:
One question more .. is it possible to change the window/door holes as well?

Something like Custom reveal? Custom reveal itself is quite limited but you can edit polygonal wall near the door or the window.