topic ArchiCAD 11 Hotfix (build 1086) in Modeling

ArchiCAD 11 Hotfix (build 1086)

Greg Kmethy — Thu, 20 Sep 2007 12:04:44 GMT

Dear ArchiCAD-Talkers,

We have released Hotfix 1086 for ArchiCAD 11. It applies to Commercial, Trial and Educational licenses, and is currently available for INT and USA language versions. To download the Hotfix, please use "Check for updates..." command in Help menu.

Before installing the Hotfix, please take a moment to read the Release Notes!

Files with hotlinked modules may open unusually slow for the first time, as a result of a critical bugfix. This is normal, and happens at the first opening. After saving such a file, you might notice that the file gets significantly smaller.

A note for Grid Tool users: This Hotfix is a must-have for Grid Tool users. It fixes several functionality bugs, as well as some frequent crashes.

Greg

Re: ArchiCAD 11 Hotfix (build 1086)

Anonymous — Thu, 20 Sep 2007 15:21:22 GMT

I say thanks to GS for released Hotfix 1086 for ArchiCAD 11

Eddy Rachmat
Papua Barat - Indonesia

Re: ArchiCAD 11 Hotfix (build 1086)

Dennis Lee — Thu, 20 Sep 2007 18:44:06 GMT

Thx for the Hotfix - Really appreciate all the responses and hardwork from GS.

Is there any chance that this can be fixed in the next hotfix? I apologize in advance if this puts you in the hot seat...

http://archicad-talk.graphisoft.com/viewtopic.php?t=12141&postdays=0&postorder=asc&highlight=pdf+reference&&start=0

Re: ArchiCAD 11 Hotfix (build 1086)

Rob — Thu, 20 Sep 2007 23:11:46 GMT

Beautiful, thanks for the Teamwork and Grid Tool bugs fixing... especially Teamwork layout creation fix came handy as we are about to consolidate our layouts scheme.
thanks again...

Re: ArchiCAD 11 Hotfix (build 1086)

Rick Thompson — Fri, 21 Sep 2007 14:47:29 GMT

I went to plot, and my plot preferences were gone? I had to re-setup everything.. which I haven't done in years, so can't remember the details???

Anyone else had this, which I assume is Hotfix related, but unless someone else had it happen, it must be the aliens again.

Hummmm.. same with Environment Schemes. I had recently redone them, and the new scheme has reverted back to the old one. I didn't rename it, but resaved the scheme.

Re: ArchiCAD 11 Hotfix (build 1086)

Dennis Lee — Fri, 21 Sep 2007 17:44:01 GMT

For me, I don't have this problem. Everything working as expected, so far.

Re: ArchiCAD 11 Hotfix (build 1086)

Dwight — Fri, 21 Sep 2007 18:43:46 GMT

Rick wrote:
I went to plot, and my plot preferences were gone? I had to re-setup everything.. which I haven't done in years, so can't remember the details???

Archicad can't cope if you move things around. Since some users do not have the plot preference disappearing problem, is it possible you relocated your preferences and put new Archicad in a snit?

Re: ArchiCAD 11 Hotfix (build 1086)

Rick Thompson — Fri, 21 Sep 2007 19:03:44 GMT

Nope, didn't move a thing, just weird is all I can see... but I didn't imagine it. If it's just me and my PPC mac, then it had to have been the aliens.

Re: ArchiCAD 11 Hotfix (build 1086)

Dwight — Fri, 21 Sep 2007 19:09:31 GMT

The ones with fire coming from their heads or the grey ones?

Re: ArchiCAD 11 Hotfix (build 1086)

TDabney — Fri, 21 Sep 2007 19:20:56 GMT

I just installed this hotfix as well and noticed a different problem. I used to be able to open more than one session of ArchiCAD to copy/paste between files etc... You could check the box that said "Launch a new instance of ArchiCAD and voila, 2 sessions open. Now when I try to open a second session, I get a WIBU error - No WIBU-KEY driver found. (501) - so I have to open the second session in "evaluation mode". Am I the only one on this?

I'm using AC11 w/just installed hotfix 1086 on an Intel MacBook Pro running 10.4.10

Thanks,
Tom

Re: ArchiCAD 11 Hotfix (build 1086)

Dwight — Fri, 21 Sep 2007 19:25:26 GMT

No problem with two sessions on a G5.

Re: ArchiCAD 11 Hotfix (build 1086)

Rick Thompson — Fri, 21 Sep 2007 19:39:20 GMT

Dwight wrote:
The ones with fire coming from their heads or the grey ones?

The grey ones. I don't think the fireheads are evil, maybe confused relating to the earth, but not evil.

I can open another secession here.

Re: ArchiCAD 11 Hotfix (build 1086)

TDabney — Fri, 21 Sep 2007 20:16:24 GMT

So I'm the only lucky one so far? Anyone else w/an Intel Mac?
Tom

Re: ArchiCAD 11 Hotfix (build 1086)

TDabney — Fri, 21 Sep 2007 20:21:12 GMT

OK, this seems to be a WIBU driver issue. I quit my ArchiCAD session and now I can't start it back up w/out the same WIBU error message. I will investigate further.

Tom

Re: ArchiCAD 11 Hotfix (build 1086)

aahatimo — Fri, 21 Sep 2007 20:35:08 GMT

did this hotfix auto update anyones goodies?
mine are still all 7/24/07. the release notes states hotfix updates goodies.
http://tr.graphisoftus.com/downloads/DL's%20for%20GraphisoftUS/AC%2011%20stuff/AC%2011%20updaters/AC11-1040to1086-ReleaseNotes.htm

Re: ArchiCAD 11 Hotfix (build 1086)

TDabney — Fri, 21 Sep 2007 20:45:13 GMT

OK, I went to the WIBU folder inside the ArchiCAD 11 folder and found the only thing in there was a zipped (compressed) file. I unzipped it - it was a WIBU installer - which I ran. Now everything works as it should. Could the hotfix update have done that?

Tom

Re: ArchiCAD 11 Hotfix (build 1086)

Anonymous — Fri, 21 Sep 2007 20:45:35 GMT

I have install the hotfix 1086, now the "OK" bottom disappear in the setup windows of the element attribuetes...so I unable to save the changes that I have made for materials, lines, fills. etc?, same problem with the layer settings.
some one has the same problem?

Re: ArchiCAD 11 Hotfix (build 1086)

Dwight — Fri, 21 Sep 2007 22:40:33 GMT

The first guys in the pond always find the gators.

Re: ArchiCAD 11 Hotfix (build 1086)

Greg Kmethy — Mon, 24 Sep 2007 15:27:38 GMT

Unfortunately, the Plot Setup dialog needs to be re-set after applying the Hotfix. This is a side-effect caused by a necessary bugfix. To learn more about this, please read:
http://archicadwiki.com/plotter_preferences
The article also describes how to recover the settings, in case you don't remember the settings.

Further Hotfixes will not cause such problems. We are sorry for the inconvenience.

I have also added this to the Hotfix Release Notes. Rick, thanks for pointing this out.

Greg

Re: ArchiCAD 11 Hotfix (build 1086)

Greg Kmethy — Mon, 24 Sep 2007 15:29:18 GMT

Victor wrote:
I have install the hotfix 1086, now the "OK" bottom disappear in the setup windows of the element attribuetes...

Victor, are you on Mac PPC/ Intel MAC or PC? What language version?

(It is a good idea to include this information in your signature)