https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54315#M27554 That seemed to help. I changed my air space to a black coloured empty fill (to help with rendering) I also found that a small component of the wall at the base was interfering with the connections. Tue, 25 Mar 2008 16:40:32 GMT Anonymous 2008-03-25T16:40:32Z https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54311#M27550 <DIV class="actalk-migrated-content"><T>How do I fix these complex wall connections? The wall with the blue insulation is a fairly complex faceted wall with a very shallow angle. It looks fine in plan.<BR /> <BR /> I have been playing around for a while but I just can't seem to correct it.</T></DIV><BR /><IMG src="http://community.graphisoft.com/t5/image/serverpage/image-id/72377iF7DB9C445885A629/image-size/large?v=v2&amp;px=999" border="0" alt="WALL CONECTION ISSUE.jpg" title="WALL CONECTION ISSUE.jpg" /> Thu, 20 Mar 2008 17:44:19 GMT https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54311#M27550 Anonymous 2008-03-20T17:44:19Z https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54312#M27551 Hot line inside? Thu, 20 Mar 2008 19:23:11 GMT https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54312#M27551 Dwight 2008-03-20T19:23:11Z https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54313#M27552 /\ Yes the centre line is set up to a specific material face within the wall. (Is that the Hotline?) Thu, 20 Mar 2008 19:31:05 GMT https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54313#M27552 Anonymous 2008-03-20T19:31:05Z https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54314#M27553 Are there any voids?<BR /> If so fill then with an empty fill Sun, 23 Mar 2008 23:01:43 GMT https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54314#M27553 Anonymous 2008-03-23T23:01:43Z https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54315#M27554 That seemed to help. I changed my air space to a black coloured empty fill (to help with rendering) I also found that a small component of the wall at the base was interfering with the connections. Tue, 25 Mar 2008 16:40:32 GMT https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54315#M27554 Anonymous 2008-03-25T16:40:32Z https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54316#M27555 Give the different number for layer, for example 1 or 2. Tue, 25 Mar 2008 16:48:49 GMT https://community.graphisoft.com/t5/Modeling/Wall-Connections/m-p/54316#M27555 Anonymous 2008-03-25T16:48:49Z