topic Re: Match line for cutting a large structure into parts in Modeling

Match line for cutting a large structure into parts

Anonymous — Tue, 23 May 2023 13:36:12 GMT

I'm working on a building that is too large to fit on 24 x 36 paper at 1/4" scale.

Is there an easy/automatic way to create a match line which will allow me to break a story over more than one page?

I have figured out a work-around using layers by just creating two sets of exterior walls, two sets of roof planes, etc., then creating an A and B Layer set which will turn the two halves on or off, but I can see that there will be a lot of work and some difficulty where the dividing line is not clean (such as at roof planes or slabs).

Any suggestions?

Thanks in advance for the help,

Re: Match line for cutting a large structure into parts

Eduardo Rolon — Fri, 06 May 2005 00:27:35 GMT

If you are using PlotMaker, the way to work is to create 2 views (works with 1 view also) of the plan (put hotspots in the corners and near the match line symbol where you need to crop). In PM import each view and crop the border to the hotspots so that it only shows what is needed.

Re: Match line for cutting a large structure into parts

__archiben — Fri, 06 May 2005 01:30:21 GMT

ejrolon wrote:
If you are using PlotMaker, the way to work is to create 2 views (works with 1 view also) of the plan (put hotspots in the corners and near the match line symbol where you need to crop). In PM import each view and crop the border to the hotspots so that it only shows what is needed.

or simply duplicate the view onto another layout and crop? it requires the 'match line' to be drafted by hand (probably in plotmaker).

it's also useful to save a set of stripped-down very small-scale (1:2000) views to use as keys much like you would find in the beginning of a street directory or something.

here's one i made earlier . . .

~/archiben

Re: Match line for cutting a large structure into parts

Anonymous — Fri, 06 May 2005 02:43:51 GMT

~/archiben wrote:
ejrolon wrote:
it requires the 'match line' to be drafted by hand (probably in plotmaker)..

~/archiben

I would think you would want to keep the match line in Archicad and just crop the view to fit in Plotmaker. This way you have the advantage to be able to dimension to the match line if required.

Re: Match line for cutting a large structure into parts

Eduardo Rolon — Fri, 06 May 2005 03:17:34 GMT

I was rereading my post and I should have specified that the views should be created in AC and that the match line should be drawn (or selected from the library) there.

Re: Match line for cutting a large structure into parts

Djordje — Fri, 06 May 2005 07:30:05 GMT

You can also save two views in ArchiCAD - one for part 1 and another for part 2; import them to separate layouts; make sure that the connection line is shown.

It would be nice to have the detail tool preserve the 2D elements, then the referencing would be automatic, but ... something has to be in the wish list too.

Re: Match line for cutting a large structure into parts

Link — Fri, 06 May 2005 08:14:29 GMT

If you created the match line in ArchiCAD, you could use hotspots on or near it to crop your (polygonal) PlotMaker drawing to.

Cheers,
Link.

Re: Match line for cutting a large structure into parts

__archiben — Fri, 06 May 2005 08:33:57 GMT

Millard wrote:
I would think you would want to keep the match line in Archicad and just crop the view to fit in Plotmaker. This way you have the advantage to be able to dimension to the match line if required.

ejrolon wrote:
I was rereading my post and I should have specified that the views should be created in AC and that the match line should be drawn (or selected from the library) there.

Link wrote:
If you created the match line in ArchiCAD, you could use hotspots on or near it to crop your (polygonal) PlotMaker drawing to.

yeah - ok. do it in archiCAD, eh?

~/archiben

Re: Match line for cutting a large structure into parts

Link — Fri, 06 May 2005 12:00:28 GMT

I reckon mate - what were YOU thinking?

Hope it's not too cold down there.

Cheers,
Link.

Re: Match line for cutting a large structure into parts

Anonymous — Fri, 06 May 2005 15:54:42 GMT

You guys rock! Thanks for all the input.

Re: Match line for cutting a large structure into parts

__archiben — Sat, 07 May 2005 03:56:42 GMT

Link wrote:
I reckon mate - what were YOU thinking?

Hope it's not too cold down there.

can't even get above 94% on that competency challenge thing either. i think it really must be the cold getting to me mate! that or the local brew . . .

~/archiben

Re: Match line for cutting a large structure into parts

Link — Sun, 08 May 2005 10:16:34 GMT

I've only given it one shot mate - I may try again later when I feel the burning desire for undue stress and panic. Was a little tougher than I was expecting - barely had time to finish my beer!

At least these results are more accurate than the beta test results hey? Just kidding #1, juuuuuust kiding!

Cheers,
Link.