topic Re: tapered column in Modeling

tapered column

Anonymous — Fri, 26 May 2023 10:54:40 GMT

how do i create a square tapered column on all 4 sides. base 6' and top 2'.

help?

ac7

Re: tapered column

Vitruvius — Thu, 15 Jul 2004 09:28:30 GMT

If you're using AC 8.1 I can eMail you a tapered column. It won't work with earlier versions.

Cheers, Cameron

Re: tapered column

Steve Jepson — Thu, 15 Jul 2004 09:30:10 GMT

lsid wrote:
how do i create a square tapered column on all 4 sides. base 6' and top 2'.

help?

ac7

You can use roofs if you want to. Mesh tool will work well too.

Re: tapered column

Anonymous — Thu, 15 Jul 2004 12:15:00 GMT

I found meshes to be the easiest but you do get problems if you need one edge vertical.... meshes don't like to put points on top of one another, thats where SOE is great, you can subtract a slab or wall out of it.
The reason I go with meshes is they are easier to edit. Before with AC 7.1 (and before I could work meshes) I would leave my cutting roofs on a layer called templates in case I needed to change the column but thats pretty laborious, you'd have to untrim the object and retrim to suit.

Re: tapered column

Anonymous — Thu, 15 Jul 2004 14:13:03 GMT

You can build it with thick walls, create some roofs on a hidden layer and trim the walls to these roofs. This allows you to control the column height more accurately than using roofs alone. Once you jump to 8.1 solid element operations open up some other possibilities.

Re: tapered column

Djordje — Thu, 15 Jul 2004 17:47:27 GMT

lsid wrote:
how do i create a square tapered column on all 4 sides. base 6' and top 2'.

Horizontal roof with the edge angle set to the right value (calculate it from the base size difference and the height) is the best bet.

Re: tapered column

Anonymous — Thu, 15 Jul 2004 20:15:01 GMT

thanks so much for your help. I have used mesh tool . I drew 2 squares and set the outer square Z to 0 and the inner square Z to the height. here is what I got.....

Re: tapered column

Erika Epstein — Fri, 16 Jul 2004 04:20:15 GMT

1. In section "13 special construction" use the "cone" in "basic shapes"
2. under 3D representation set REsolution to 4 [ shows the resolution of a circle as one with 4 facets).
3. set bottom circle radius to 1/2 the length of one side
4. set top of circle radius to 1/2 the lenght of the top's side
5. Under "structural dimensions use "cone length on center " to set height.

Re: tapered column

Anonymous — Thu, 11 Jun 2020 01:12:58 GMT

Hi all, I see this is an old topic, however with AC23 we can now taper columns and beams within the default settings. I have just used it for the first time and I cannot find a way to taper all 4 sides, whether symmetrically or not, it only tapers 3 out of the 4 sides. It seems an odd 'feature' which doesn't allow to control how the element tapers. Is there a way to achieve this that someone knows?

Re: tapered column

Barry Kelly — Thu, 11 Jun 2020 01:34:17 GMT

Is your column reference axis line in the center of the column?

Barry

Re: tapered column

Anonymous — Mon, 15 Jun 2020 03:53:36 GMT

DOH!!!
Thanks Barry!
So this is how you can control the slant, I see. Still not 100% control on it but better than nothing. Will do the job for now.
Cheers again,

Claudio

PS: apologies for the late response and thank you for your prompt response. I must have missed it and have not received a notification on my email

Re: tapered column

Barry Kelly — Mon, 15 Jun 2020 05:08:24 GMT

Deviz wrote:
PS: apologies for the late response and thank you for your prompt response. I must have missed it and have not received a notification on my email

This may help with that.

https://archicad-talk.graphisoft.com/viewtopic.php?f=16&t=68961&start=10#p306505

Barry.