topic Re: How can the 2D Section Elevation Refresh be speeded up? in Modeling

How can the 2D Section Elevation Refresh be speeded up?

Anonymous — Tue, 23 May 2023 15:20:51 GMT

Each time I adjust an object in a Section Elevation View I refresh the image to see the effect of the change. This takes a few seconds.

I do have the Section/Elevation set to show Vectorial 3D Hatching so that the fills of the materials show up.
I have a fairly quick computer and a fairly quick graphics card--both with a good deal of memory.

How can the 2D Section Elevation Refresh be speeded up?

Thank you,
John

Re: How can the 2D Section Elevation Refresh be speeded up?

Barry Kelly — Fri, 20 May 2005 01:24:27 GMT

johncassel wrote:
Each time I adjust an object in a Section Elevation View I refresh the image to see the effect of the change. This takes a few seconds.

I do have the Section/Elevation set to show Vectorial 3D Hatching so that the fills of the materials show up.
I have a fairly quick computer and a fairly quick graphics card--both with a good deal of memory.

How can the 2D Section Elevation Refresh be speeded up?

Thank you,
John

Are you using a PLA library or do you have an expanded library so you can edit and add objects.

I noticed in testing that using a PLA library is much quicker when generating elevations.
Problem is you can't easily modify the scripts of existing objects or add new objects without expanding the the library, modifying or adding object, and then re-archive.
A real pain if you do this all the time.

See also this thread.
http://archicad-talk.graphisoft.com/viewtopic.php?p=31303&highlight=#31303

Barry.

Re: How can the 2D Section Elevation Refresh be speeded up?

Djordje — Fri, 20 May 2005 05:03:04 GMT

johncassel wrote:
How can the 2D Section Elevation Refresh be speeded up?

Use limited depth S/E so that the whole model does not have to be re-calculated. Also, do the Layer sets where the interior stuff is turned off for the elevations.

Re: How can the 2D Section Elevation Refresh be speeded up?

Anonymous — Fri, 20 May 2005 18:38:14 GMT

Djordje wrote:
Use limited depth S/E so that the whole model does not have to be re-calculated. Also, do the Layer sets where the interior stuff is turned off for the elevations.

Djordje,
Thank you for your advice. As my current project gets more complex rendering Sections/Elevation views takes longer and longer. I do have the limits of the Section/Elevation (depth and length) set to the minimum and all of the interior layers shut off.
Is there anything hardware wise that would make these renders faster?
Thank you,
John

Re: How can the 2D Section Elevation Refresh be speeded up?

TomWaltz — Fri, 20 May 2005 20:05:09 GMT

Our office makes heavy use of "Temporary sections." We will cut a second elevation that is only 25 or 50 feet long (on a 200+' long building), to look at small segments of it at a time. Cuts down regen time in a BIG way!

Re: How can the 2D Section Elevation Refresh be speeded up?

Djordje — Mon, 23 May 2005 16:40:04 GMT

Also, try without elevation hatching and shadows ...

Zero depth section is lightning fast.