https://community.graphisoft.com/t5/Modeling/Strange-lock-coordinate-behavior/m-p/93083#M48737 <DIV class="actalk-migrated-content"><T>When using the shift key to lock a coordinate, I sometimes get a strange behavior of AC10 : <BR /> I start drawing a line, I then press the shift key : <BR /> . AC will let me draw a line horizontally if the horizontal direction was the nearest constrain <BR /> . AC won't let me move pick any other point except the start of the line is the vertical constrain was the nearest... <BR /> <BR /> Quite hard to explain, and very annoying ! <BR /> <BR /> Am I missing some new function that I could have activated without knowing it ?</T></DIV> Thu, 08 Jun 2006 11:03:07 GMT Anonymous 2006-06-08T11:03:07Z https://community.graphisoft.com/t5/Modeling/Strange-lock-coordinate-behavior/m-p/93083#M48737 <DIV class="actalk-migrated-content"><T>When using the shift key to lock a coordinate, I sometimes get a strange behavior of AC10 : <BR /> I start drawing a line, I then press the shift key : <BR /> . AC will let me draw a line horizontally if the horizontal direction was the nearest constrain <BR /> . AC won't let me move pick any other point except the start of the line is the vertical constrain was the nearest... <BR /> <BR /> Quite hard to explain, and very annoying ! <BR /> <BR /> Am I missing some new function that I could have activated without knowing it ?</T></DIV> Thu, 08 Jun 2006 11:03:07 GMT https://community.graphisoft.com/t5/Modeling/Strange-lock-coordinate-behavior/m-p/93083#M48737 Anonymous 2006-06-08T11:03:07Z