topic Re: Edge visibility of wall in plan in Modeling

Edge visibility of wall in plan

ratnabhirud — Wed, 24 May 2023 10:59:59 GMT

Hello,

Why edge of the same wall is showing different in plan. (AC ver. 14)
Attaching snap shot .

Regards,

Ratna

Re: Edge visibility of wall in plan

Laszlo Nagy — Tue, 31 Jan 2012 13:24:34 GMT

In case of Wall 2, you may actually have two instances of the same Wall on top of each other. Or there is another shorter Wall there. That is one case that can cause this behavior.

Re: Edge visibility of wall in plan

ratnabhirud — Wed, 01 Feb 2012 05:18:13 GMT

Thanks,

But I have checked this wall, it is single and continuous i.e. 1 and 2 is one single wall.

Regards,

Ratna

Re: Edge visibility of wall in plan

Anonymous — Wed, 01 Feb 2012 07:11:44 GMT

Have you turn all invisible layer? You could have a wall on same location on invisible layer or different storey and same height

Re: Edge visibility of wall in plan

ratnabhirud — Wed, 01 Feb 2012 09:42:14 GMT

hello Baby Boon,

I have checked this also.
may be software bug?

Regards,

Ratna

Re: Edge visibility of wall in plan

Anonymous — Wed, 01 Feb 2012 10:20:09 GMT

ratnabhirud wrote:
hello Baby Boon,

I have checked this also.
may be software bug?

Regards,

Ratna

Hi Ratna,

Could you upload your model to check this ?
I think there's various way to cause this problem! Last time I had similar issue when "a complex profile wall" touch another wall accidentally and they intersect each other automatically. it's harder to explain here than check the model.

Re: Edge visibility of wall in plan

ratnabhirud — Thu, 02 Feb 2012 04:44:16 GMT

Hello Riiiiv,

Actually the zip file is still 1.56 mb , so can't be able to attach as per Forum rule.

This is very simple plan and there is no Composite or Complex wall.

Just for your information , I used Split command in other case but not in attached image.

Regards,

Ratna

Re: Edge visibility of wall in plan

ratnabhirud — Thu, 02 Feb 2012 07:14:39 GMT

Hi Riiiiv,

I can not upload the project file as it is @2.2 mB. Instead you can download it from this link:

File

Re: Edge visibility of wall in plan

Anonymous — Thu, 02 Feb 2012 09:22:39 GMT

ratnabhirud wrote:
Hi Riiiiv,

I can not upload the project file as it is @2.2 mB. Instead you can download it from this link:

File

Hi ratna,

I've checked your model and if I'm right the column C10 at mid of wall W2 cause problem. Could you try to delete that column? Is it back to normal?

What I've seen here is that column wasn't in the right angle (not PERFECTLY parallel with axis X). Could you try to rotate it back and check the result?

Re: Edge visibility of wall in plan

ratnabhirud — Fri, 03 Feb 2012 08:02:27 GMT

Hello Riiiiv,

You found the problem correctly,
Thank you very much.

Regards,

Ratna

Re: Edge visibility of wall in plan

Anonymous — Fri, 03 Feb 2012 08:57:35 GMT

ratnabhirud wrote:
Hello Riiiiv,

You found the problem correctly,
Thank you very much.

Regards,

Ratna

Hi ratna,

I had to beware of "micromet deviation" (see attached image). many times they cause unexpected or missing lines at wall connections

It remind me that I had to have 1-day-stomachache to check why there's redundant line at wall connection in a UK masonry house with many types of composite walls as I thought I did everything right! Checked wall priorities, checked Floor Plan Display,...when nearly give up I thought suddenly: "did I draw NOT EXACTLY RIGHT?", zoom in and I found the problem luckily !

Now I usually re-draw elements that cause problem when tired of looking for solutions ! many times it helped!

Regards,