topic Re: delete mullion in curtain wall not work!!!! in Modeling

delete mullion in curtain wall not work!!!!

Anonymous — Wed, 24 May 2023 11:08:53 GMT

Hi i have small question that i face trouble with it why i can not delete vertical mullions while horizontal mullions deleted normally as you can see in the image

Re: delete mullion in curtain wall not work!!!!

NCornia — Mon, 30 May 2011 20:11:47 GMT

You can delete the mullion if you select all of the mullions in-line with it. You cannot delete the individual mullion you have shown since this will break the boundary between the two adjacent panels and a panel cannot heal unless it has a regular geometric shape. The mullion below cuts into the regular geometric shape and cannot stand alone, so the mullion above it cannot be deleted, unless all mullions in that axis are deleted simultaneously.

Re: delete mullion in curtain wall not work!!!!

Anonymous — Mon, 30 May 2011 20:20:08 GMT

although i chose the all mullion in the vertical direction id did not deleted why ??

Re: delete mullion in curtain wall not work!!!!

NCornia — Tue, 31 May 2011 00:48:25 GMT

Ahmed,

It did not delete in the image above because you are creating a similar situation by deleting these vertical mullions together. The horizontal mullion that intersects the vertical on the right would have to be deleted first.

Re: delete mullion in curtain wall not work!!!!

Laszlo Nagy — Tue, 31 May 2011 22:05:30 GMT

Set the type of the mullion to Invisible if you cannot delete it.

Re: delete mullion in curtain wall not work!!!!

Anonymous — Tue, 31 May 2011 22:12:01 GMT

i did invisible but the problem when i put doors inside this panels it become small from far space i am trying delete hopefully this panels join each other at the medium space because the entrance its door should become bigger and doors read only the panel width that i want to extend about structure i will join later junction without mullion at this medium space

Re: delete mullion in curtain wall not work!!!!

Laszlo Nagy — Wed, 01 Jun 2011 14:33:41 GMT

Could you post an image about this door situation?
I am not sure I am following your explanation.

Re: delete mullion in curtain wall not work!!!!

Anonymous — Thu, 02 Jun 2011 12:46:39 GMT

here is the door situation i have problem with

Re: delete mullion in curtain wall not work!!!!

Laszlo Nagy — Thu, 02 Jun 2011 21:09:29 GMT

I think the reason the Door is not extended wider is because the curve is made from segments and that is the size of a segment.
It cannot be greater than that.
So it does not work like it would if you removed that frame in a straight Curtain Wall.
In the vertical direction: you can place a horizontal frame in that panel and then put the Door into the panel below this newly created frame.