topic Re: Guastavino Vault in Modeling

Guastavino Vault

Anonymous — Tue, 09 May 2023 14:46:31 GMT

How would I model a guastavino vault?
I know roughly how to create the simple barrel vaults, however I'd like to be able to create a kind of roof structure which curves down to the ground/columns.
Thanks.

Re: Guastavino Vault

Anonymous — Thu, 09 Feb 2012 16:58:22 GMT

Mesh generator is your answer...

Re: Guastavino Vault

Anonymous — Fri, 10 Feb 2012 10:06:35 GMT

Is it possible with the Shell tool?

Re: Guastavino Vault

Anonymous — Wed, 15 Feb 2012 15:28:16 GMT

Anyone?

Re: Guastavino Vault

Erwin Edel — Wed, 15 Feb 2012 15:47:52 GMT

Probably not with a single shell, but perhaps by combining multiple shells into the one shape.

http://www.graphisoft.com/ftp/publishing/ac15_help_INT/Files/wwhelp/wwhimpl/js/html/wwhelp.htm#href=03_Virtual%20Building.06.215.html

good starting point?

Re: Guastavino Vault

Anonymous — Wed, 15 Feb 2012 20:33:30 GMT

I think that archicad can´t do that... maybe other better program like Revit
Sorry but the curtain wall doesnt fit with the vault ... more haste, less speed
No more than 10 minutes, archicad + artlantis include.

Re: Guastavino Vault

Anonymous — Thu, 16 Feb 2012 02:06:37 GMT

Cinema 4D plug connection to ArchiCAD in will do the job pretty easy.

Re: Guastavino Vault

Anonymous — Thu, 16 Feb 2012 09:57:20 GMT

Thanks for all the response.
I think Revit would be easily able to create my vaults. Unfortunately, it seems ArchiCad isn't quite capable at this point.
But if I was to create my vaults in Revit, would I take it back in to ArchiCad as an object?
Thanks

Re: Guastavino Vault

Ralph Wessel — Thu, 16 Feb 2012 11:33:46 GMT

obeythevuvuzela wrote:
How would I model a guastavino vault?
I know roughly how to create the simple barrel vaults, however I'd like to be able to create a kind of roof structure which curves down to the ground/columns.
Thanks.

Try this exercise with OBJECTiVE. I made the attached image in a few minutes using its profiling, bending, and cutting tools.

Re: Guastavino Vault

Anonymous — Fri, 17 Feb 2012 00:29:57 GMT

With archiforma and the "Coons Surface" is a smart way to do too.

Re: Guastavino Vault

Anonymous — Fri, 17 Feb 2012 08:03:26 GMT

This vault is quite easy to build with standard AC tools!

If you spend some time to define the geometry in 2D it is usually possible to build what you want. We cannot expect to have a tool for every shape we conceive. There is not a vault tool in 3dsMax either, but nobody complaints! 😉

Complex profile is the right approach for it!

Re: Guastavino Vault

Anonymous — Fri, 17 Feb 2012 08:05:49 GMT

And seen from the bottom:

Re: Guastavino Vault

rob2218 — Fri, 17 Feb 2012 15:46:51 GMT

wow....impressive sir.
you will have to share your secrets on how you did this...perhaps a step-by-step tut?

Re: Guastavino Vault

Anonymous — Sat, 18 Feb 2012 16:58:05 GMT

I think, this is possible with the Complex Profile tool. Define the geometry in 2D (the sinusoidal shape), then apply to a wall and draw a circle wall. If it's not represent correct in plan (to be seen from above), rotate in 3D and save as object.
Also could be drawing with the Profile add-on.
Is that correct?
My opinion.
If I want to apply to a roof, and place a skylight, is possible?

Re: Guastavino Vault

rob2218 — Sat, 18 Feb 2012 17:33:12 GMT

Looking for a step-by-step here guys.....can anyone give us one?

Re: Guastavino Vault

Anonymous — Sun, 19 Feb 2012 01:31:58 GMT

Maybe this can help you:
at point 5. Side View, Azimuth 90°

Re: Guastavino Vault

rob2218 — Sun, 19 Feb 2012 14:42:02 GMT

Excellent step-by-step sir......Kudos to you!!
thank you.