https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124448#M65992 Although not a direct solution, but you can simply use the roof tool for the ramp which gives better control of the angle/percentage and a slab tool for the landing. Tue, 02 Nov 2010 09:30:37 GMT Srinivas 2010-11-02T09:30:37Z https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124446#M65990 <DIV class="actalk-migrated-content"><T>Hi, I must draw a ramp, but I can't properly define the settings of the ramp. I trying but is not working. How could change a percentage instead of degrees?<BR /> Many thanks</T></DIV> Mon, 01 Nov 2010 16:16:58 GMT https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124446#M65990 Anonymous 2010-11-01T16:16:58Z https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124447#M65991 ArchiCAD automatically calculates the required angle for the ramp to reach from one height to another based on the ramps length etc. <BR /> <BR /> So if you want to adjust the angle yourself then either change the angle value in Thread settings in the Stairmaker toolbox or construct the ramp manually using <A href="http://www.archicadwiki.com/Creative%20Uses%20of%20Complex%20Profiles" target="_blank">Complex profiles</A>. Tue, 02 Nov 2010 08:12:00 GMT https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124447#M65991 adzik 2010-11-02T08:12:00Z https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124448#M65992 Although not a direct solution, but you can simply use the roof tool for the ramp which gives better control of the angle/percentage and a slab tool for the landing. Tue, 02 Nov 2010 09:30:37 GMT https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124448#M65992 Srinivas 2010-11-02T09:30:37Z https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124449#M65993 Thanks guys. I think I use roof tool. One little problem: How to put a railing? Tue, 02 Nov 2010 15:31:05 GMT https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124449#M65993 Anonymous 2010-11-02T15:31:05Z https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124450#M65994 you can incline the railing as per the ramp slope check for the inclination angle. Tue, 02 Nov 2010 15:44:49 GMT https://community.graphisoft.com/t5/Modeling/Problem-with-ramp/m-p/124450#M65994 Srinivas 2010-11-02T15:44:49Z