https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130111#M69170 Have your mesh selected. Use the polygonal geometry method and double click inside the mesh where you want the point. Fri, 31 Jan 2014 05:39:26 GMT Erich 2014-01-31T05:39:26Z https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130110#M69169 <DIV class="actalk-migrated-content"><T>Can't put spots randomly inside Mesh</T></DIV> Thu, 25 May 2023 15:00:21 GMT https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130110#M69169 Anonymous 2023-05-25T15:00:21Z https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130111#M69170 Have your mesh selected. Use the polygonal geometry method and double click inside the mesh where you want the point. Fri, 31 Jan 2014 05:39:26 GMT https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130111#M69170 Erich 2014-01-31T05:39:26Z https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130112#M69171 Tried that over and over with no result. The only place I could create a hot spot is around the perimeter of the mesh. Fri, 31 Jan 2014 17:12:03 GMT https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130112#M69171 Anonymous 2014-01-31T17:12:03Z https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130113#M69172 Click on the mesh button and make it active.<BR /> <BR /> Hold down shift and select the mesh you want to place the hot spot in.<BR /> <BR /> Draw a line (in action only, don't select the line tool) or double click a spot in the mesh and a dialog that asks about ridges should pop up.<BR /> <BR /> That should do it. Sun, 02 Feb 2014 05:58:12 GMT https://community.graphisoft.com/t5/Modeling/Mesh-Tools/m-p/130113#M69172 Anonymous 2014-02-02T05:58:12Z