topic Re: Compoite wall Intersection 13 - skin does not cut in Modeling

Compoite wall Intersection 13 - skin does not cut

Anonymous — Fri, 06 Nov 2009 01:18:13 GMT

Why
I tried many priorities

Re: Compoite wall Intersection 13 - skin does not cut

Barry Kelly — Fri, 06 Nov 2009 01:46:58 GMT

Your centre skin has a priority of 0 and the gypsum is 10.
So the centre skin can't punch through the outer ones.
You need a priority higher than 10 and it should work fine - for this particulsr situation at least.
Barry.

Re: Compoite wall Intersection 13 - skin does not cut

Rod Jurich — Fri, 06 Nov 2009 03:54:48 GMT

Adalbert wrote:
Why
I tried many priorities

Albert, take a look here
and here, best explanation yet by Cecilia.

Re: Compoite wall Intersection 13 - skin does not cut

Anonymous — Sun, 08 Nov 2009 02:04:33 GMT

Tank you for the help
I tried figure A and does not work

Re: Compoite wall Intersection 13 - skin does not cut

Erika Epstein — Sun, 08 Nov 2009 02:57:59 GMT

Adalbert,
Have you checked that the walls have skin priorities enabled?
Select the walls,
Floor Plan and Section>Structure> Enable Skin Priorities

Re: Compoite wall Intersection 13 - skin does not cut

Anonymous — Sun, 08 Nov 2009 03:44:11 GMT

Yes I do not have problems with all the wall just this one. I will create new walls maybe that will solve the now that I understood the logic

Re: Compoite wall Intersection 13 - skin does not cut

Anonymous — Mon, 09 Nov 2009 22:03:08 GMT

New walls will cut old ones refuse to cut.
I have replaced them and cleared the old ones.
Tnaks for all the help.

Re: Compoite wall Intersection 13 - skin does not cut

Laszlo Nagy — Tue, 10 Nov 2009 19:47:39 GMT

Adalbert wrote:
New walls will cut old ones refuse to cut.
I have replaced them and cleared the old ones.
Tnaks for all the help.

I have seen this problem not long ago on AC12.
It drove me crazy.
I did the same thing: delete the affected Walls, create new ones which did the cut. I have no idea of the reason.