topic Strange colour in my sections in Modeling

Strange colour in my sections

Anonymous — Thu, 25 May 2023 16:06:35 GMT

Hello,

I've created several sections in my project and they all had a normal white background. After saving the .pln and re-opening it, my sections have become slightly grey in areas ( attached )

I've looked at the settings and they all seem to be fine so I'm not sure what may be causing the problem... Any ideas ?

It's on some of the slabs and one wall.

Thank You

Re: Strange colour in my sections

Anonymous — Tue, 04 May 2010 18:11:51 GMT

I've found that changing the section settings to ' nothing' under the Fill uncut surfaces will only changes some of the section i.e most walls are white however a few are still greyish.

Re: Strange colour in my sections

Anonymous — Tue, 04 May 2010 19:10:38 GMT

It's also occuring on the Plans

What is it I need to do in order to get the fill back to white, but still retain the cut fill as black ? The settings do say white, but they are shows as grey

Thanks

Re: Strange colour in my sections

Erika Epstein — Tue, 04 May 2010 22:54:14 GMT

Nathan,
There is a Work Environment setting that appears to 'gray' fills to differentiate them from a similar screen color. It has NO effect on prints.
Options>Work Environment>User Preference Schemes>on-Screeen Options> Automatic Pen color visibility adjustments

Is this what is happening?

Re: Strange colour in my sections

Anonymous — Tue, 04 May 2010 23:33:41 GMT

Erika wrote:
Nathan,
There is a Work Environment setting that appears to 'gray' fills to differentiate them from a similar screen color. It has NO effect on prints.
Options>Work Environment>User Preference Schemes>on-Screeen Options> Automatic Pen color visibility adjustments

Is this what is happening?

That explains it !

Thank you very much